National Institute Of Technology,Kurukshetra

DEPARTMENT OF MECHANICAL ENGINEERING

Faculty

Name : Gian Bhushan
Designation : Professor
Qualification : Ph. D (2004, KU)
Current Address :

BT-502, NIT Campus, NIT Kurukshetra

Phone 1 (office) : 01744-233463
Phone 2 (office) : 9416220361
Email : gbhushan@nitkkr.ac.in, aroragian@yahoo.com

Area Of Interest :

Areas of Current Interest: Tribology, Fluids Engineering, CAE

Research Activities: Guiding Ph. D & PG students in the above areas

Future Plans of Academic and Research activities:To establish Gas Turbine lab in the department, Upgrade existing labs of Tribology, guide research scholars in emerging areas like nanotribology and energy

Experience :

23 years
 

Designation

Name of Employer

Date of Joining

From

To

Management Trainee

Atlas Industries

21-10-1991

01-09-1992

Project Associate

NITTTR Chandigarh

09-02-1994

25-08-1994

Lecturer

NIT Kurukshetra

26-08-1994

05-11-1999

Lecturer (Sr. Scale)

NIT Kurukshetra

05-11-1999

05-11-04

Lecturer (Selection Grade)

NIT Kurukshetra

05-11-2004

30-06-2005

Assistant Professor

NIT Kurukshetra

01-07-2005

30-06-2008

Associate Professor

NIT Kurukshetra

01-07-2008

21-08-2013

Professor

NIT Kurukshetra

22-08-2013

till date

Other :

Research Publications -

International Journals: 40

  1. Gian Bhushan, S.S Rattan & N.P. Mehta, “Stability analysis of four-lobe pressure dam bearings.” Tribology letters, Vol. 13, No. 1, July 2002, pp. 1-7.
  2. N.P. Mehta, S.S Rattan & Gian Bhushan, “Static and dynamic characteristics of four-lobe pressure dam bearings.” Tribology letters, Vol. 15, No. 4, November 2003, pp. 415-420.
  3. G. Bhushan, S.S Rattan & N.P. Mehta, “ Effect of L/D ratio on the performance of a four-lobe pressure dam bearing.” International Journal of Mathematical, Physical and Engineering Sciences, Vol. 1, No. 4, 2007, pp. 203-207.
  4. N. K. Batra, Gian Bhushan & N.P. Mehta, “Effect of turbulence on the performance of an inverted three lobe pressure dam bearing.” International Journal of Scientific and Engineering Research, Vol. 2, No. 8, August 2011, pp 1-5.
  5. Vinkel Arora, M.L. Aggarwal & Gian Bhushan, “A comparative study of CAE and experimental results of leaf springs in automotive vehicles.” International Journal of Engineering science and Technology, Vol. 3, No. 9, September 2011, pp. 6856-6866.
  6. G. Bhushan, “Effect of load orientation on the stability of a three lobe bearing supporting rigid and flexible rotors.” World Academy of Science, Engineering and Technology, Vol. 81, 2011, pp.195-198.
  7. Gian Bhushan, Pankaj Chandna & Mohit Sethi, “Finite element analysis of a disc brake using Ansys.” International Journal of Applied Engineering Research, Vol.6, No.18, 2011, pp. 3072-3074.
  8. Deepak Chhabra, Pankaj Chandna & Gian Bhushan, “Design and analysis of smart structures for active vibration control using piezo-crystals.” International Journal of Engineering and Technology, Vol. 1, No. 3, Dec 2011, pp 153-163.
  9. Vinkel Arora, Gian Bhushan & M.L. Aggarwal, “Eye design analysis of single leaf spring in automotive vehicles using CAE tools.” International Journal of Applied Engineering and Technology, Vol. 1, October-December 2011, pp 88-97.
  10. N. K. Batra, Gian Bhushan & N.P. Mehta, “Effect of load orientation on the performance of an inverted three lobe pressure dam bearing.” Advanced Material Research Vol. 365, October 2011, pp 83-88.
  11. M.P. Garg, Ajai Jain & Gian Bhushan, “Investigation of the effect of process parameters on the surface roughness in wire EDM of Titanium alloy.” Advanced Material Research Vols. 472-475, February 2012, pp 78-81.
  12. N. K. Batra, Gian Bhushan & N.P.Mehta,” Static and dynamic characteristics of an inverted three lobe pressure dam bearing.” Akademia, Vol. 1, Issue 1, March 2012, ea0114.
  13. N.P. Mehta, S.S Rattan, Gian Bhushan & N.K. Batra, “Stability analysis of an inverted three-lobe pressure dam bearing.” Journal of Mechanical Science and Technology, 26 (8), August 2012, pp. 2425-2430.
  14. N. K. Batra, Gian Bhushan & N.P. Mehta, “Effect of elastic deformation of bearing liner on the performance of an inverted three lobe pressure dam bearing.” Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, July 2012, 226(10), pp. 819-826.
  15. N. K. Batra, Gian Bhushan & N.P. Mehta, “Effect of ellipticity ratio on the performance of an inverted three lobe pressure dam bearing.” Tribology Transactions, 55, November 2012, pp. 798-804.
  16. M.P. Garg, Ajai Jain & Gian Bhushan, “Modelling and multi-objective optimization of process parameters of wire electric discharge machining using non-dominated sorting genetic algorithm-II.” Proc IMechE PartB: J Engineering Manufacture, 226(12), November 2012, pp. 1986-2001.
  17. M.P. Garg, Ajai Jain & Gian Bhushan, “Empirical Modeling and Optimization of Process Parameters of Wire Electrical Discharge Machining in Machining of Ti 6-2-4-2 alloy.” Journal of Machining and Forming Technology, Vol. 4, Issue 3-4, 2012, pp. 159-186.
  18. Sunil Dhingra, Gian Bhushan & Kashyap Kumar Dubey ,“Development of a combined approach for improvement and optimization of karanja biodiesel using response surface methodology and genetic algorithm,” Frontiers in Energy, Vol. 7, No. 4, December 2013, pp. 495-505.
  19. Sunil Dhingra, Gian Bhushan & Kashyap Kumar Dubey ,“Performance and emission emission parameters optimization of Mahua (Madhuca Indica) based biodiesel in direct injection diesel engine using response surface methodology,” Journal of Renewable and Sustainable Energy, December 2013, doi. 10.1063/1.4840155.
  20. Deepak Chhabra, Gian Bhushan & Pankaj Chandna, “Optimal Placement of Piezoelectric Actuators on Plate Structures for Active Vibration Control using Modified Control Matrix and Singular Value Decomposition Approach.” International Journal of Mechanical Science and Engineering, Vol. 7, No. 4, 2013, pp. 870-875.
  21. Sunil Dhingra, Kashyap Kumar Dubey & Gian Bhushan, “Enhancement in Jatropha-based bio-diesel yield by process optimisation using design of experiment approach.” International Journal of Sustainable Energy., Vol.33, No. 4, 2014, pp 842-853.
  22. M.P. Garg, Ajai Jain & Gian Bhushan, “Multi-objective Optimization of Process Parameters in Wire Electric Discharge Machining of Ti-6-2-4-2 Alloy.” Arabian Journal for Science and Engineering, Vol. 39, Nos. 2, 2014, Feb. 2014, pp. 1465-1476.
  23. Sunil Dhingra, Gian Bhushan & Kashyap Kumar Dubey, “Multi-objective optimization of combustion, performance and emission parameters in a jatropha biodiesel engine using non-dominated sorting genetic algorithm-II.” Frontiers of Mechanical Engineering, March 2014, Vol. 9, No. 1, pp 81-94.
  24. Sunil Dhingra, Kashyap Kumar Dubey & Gian Bhushan, “A Polymath Approach for the Prediction of Transesterification Process Variables of Polanga Biodiesel.” Journal of the American Oil Chemists’ Society, April 2014 April 2014, Volume 91, No 4, pp 641-653.
  25. Vinkel Arora, Gian Bhushan & M.L. Aggarwal, “Fatigue life prediction of leaf springs in automotive vehicles using CAE tools.” International Journal of Computer Aided Engineering and Technology (IJCAET), Vol. 6, No. 3, 2014, pp 271-292.
  26. Vinkel Arora, Gian Bhushan & M.L. Aggarwal, “Effect of assembly stresses on fatigue life of symmetrical 65Si7 leaf springs.”International Scholarly Research Notices, August 2014, doi:10.1155/2014/762561.
  27. Pravin Kumar, S.K Dayak, Anil M. Datar & Gian Bhushan, “Analysis of transverse vibration modes of a gun barrel subjected to recoil”. Applied Mechanics and Materials, Vol. 592-594, July 2014, pp. 2011-2015.
  28. Vinkel Kumar Arora, Gian Bhushan, and M. L. Aggarwal, “Fatigue Life Assessment of 65Si7 Leaf Springs: A Comparative Study,” International Scholarly Research Notices, October 2014, doi:10.1155/2014/607272
  29. Vinkel Arora, Gian Bhushan & M.L. Aggarwal, “Static structural CAE analysis of symmetrical 65Si7 leaf springs in automotive vehicles,” Engineering Soild Mechanics, 2015, vol. 3, no. 1, pp.59-74.
  30. Gian Bhushan, Vinkel Arora, & M.L. Aggarwal, “A Comparative study of standard, casted and riveted eye design of a mono leaf spring using CAE tools.” International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering, Vol. 9, No. 1, 2015, pp.70-74.
  31. M.P. Garg, Ajai Jain & Gian Bhushan, “On process analysis and optimization of wire electric discharge machining of Ti 6-2-4-2 using regression modeling and genetic algorithms.” Int. J. of Machining and Machinability of Materials, Vol. 17, Nos. 3/4, 2015, pp. 185-210.
  32. VK Arora, G Bhushan & ML Aggarwal, "Effect of surface decarburisation, scragging stress and individual leaf camber on fatigue life of 65Si7 leaf springs.” International Journal of Design Engineering Vol. 6, No. 1, 2015, pp. 22-44.
  33. VK Arora, G Bhushan & ML Aggarwal, “Precise estimation of individual leaf camber and stepping in symmetrical 65Si7 leaf springs.” Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 36, No.6, August 2016, pp. 1717-1729.
  34. Deepak Chhabra, Gian Bhushan & Pankaj Chandna, “Optimal Placement of Piezoelectric Actuators on Plate Structures for Active Vibration Control using Modified Control Matrix and Singular Value Decomposition Approach.” Mechanics of Advanced Materials and Structures, Vol. 23, No. 3, 2016, pp. 272-280.
  35. Sunil Dhingra, Gian Bhushan & Kashyap Kumar Dubey, “Comparative performance analysis of jatropha, karanja, mahua, and polanga based biodiesel engine using hybrid genetic algorithm,” Journal of Renewable and Sustainable Energy, Vol. 8, No. 1, January 2016, doi. 10.1063/1.4939513.
  36. Bhupender Sharma, Gulshan Sachdeva & Gian Bhushan, “Performance evaluation of vortex generator of finite thickness to augment heat transfer in a compact heat exchanger”, Journal of Mechanical Engineering and Technology, 2016, Vol. 8, No. 1, pp 59-75.
  37. Sunil Dhingra, Gian Bhushan & Kashyap Kumar Dubey, “Validation and enhancement of waste cooking sunflower oil based biodiesel production by transesterification process,” Enegy Resources, Part A: Recovery, Utilization and Environmental Effects, Vol. 38, No. 10, May 2016, pp.1448-1454.
  38. VK Arora, G Bhushan & ML Aggarwal, “Enhancement of fatigue life of multi-leaf spring by parameter optimization using RSM.” Journal of the Brazilian Society of Mechanical Sciences and Engineering, September 2016, doi: 10.1007/s40430-016-0638-z
  39. Nipun Kumar, Gian Bhushan & Pankaj Chandna, “Analysis of knuckle joints of various materials using CAE tools.” International Journal of Engineering Technology, Management and Applied Sciences, Vol 5, No.1, January 2017, pp. 45-52.
  40. Bhupender Sharma, Gian Bhushan & Gulshan Sachdeva, “Effect of flow structure on heat transfer in compact heat exchanger by using finite thickness winglet at acute angle”, Journal of Thermal Engineering, Vol.3, No. 2, April 2017, pp 1149-1162.

National Journals 10

  1. G. Bhushan, S.S. Rattan & N.P. Mehta, “Effect of turbulence, ellipticity ratio & L/D ratio on the performance of four-lobe bearings with rigid and flexible rotors.” Journal of the Institution of Engineers (India), Vol. 83, July 2002, pp. 57-61.
  2. G. Bhushan, S.S. Rattan & N.P. Mehta, “ Effect of pressure dams and relief-tracks on the performance of a four-lobe bearing.” Journal of the Institution of Engineers (India), Vol. 85, Jan 2005, pp.194-198.
  3. G. Bhushan, S.S. Rattan & N.P. Mehta, “Effect of turbulence on the performance of a four-lobe pressure dam bearing.” Journal of the Institution of Engineers (India), Vol. 87, Jan 2007, pp. 18-23.
  4. G. Bhushan, S.S Rattan & N.P. Mehta, ”Effect of ellipticity ratio on the performance of a four-lobe pressure dam bearing with rigid and flexible rotors.” M R International Journal of Engineering & Technology, Vol. 1, No. 1 & 2, January-July 2008, pp. 40-45.
  5. G. Bhushan, S.S Rattan & R Kumar, “Effect of load orientation on the performance of a four-lobe bearing.” M R International Journal of Engineering & Technology, Vol. 1, No. 2, December 2009, pp. 58-62.
  6. G. Bhushan & S.S Rattan, “Effect of groove angle on the performance of a four-lobe pressure dam bearing with rigid and flexible rotors.” M R International Journal of Engineering & Technology, Vol. 2, No. 2, December 2010, pp. 35-41.
  7. G. Bhushan, S.S. Rattan & N.P. Mehta, “ Effect of load orientation on the stability of a three-lobe pressure dam bearing with rigid and flexible rotors.” Journal of Engineering & Technology, Vol. 1, No. 1, 2011, pp. 10-15.
  8. G Bhushan, S.S Rattan & N.P. Mehta, “ EHD Analysis of a four-lobe pressure dam bearing with rigid and flexible rotors.” M R International Journal of Engineering & Technology, Vol. 3, No. 1, June 2011, pp. 17-21.
  9. N. K. Batra, Gian Bhushan & N.P. Mehta, “Effect of L/D ratio on the performance of an inverted three lobe pressure dam bearing.” Journal of Engineering & Technology, Vol. 1, No. 2, 2011, pp. 94-98.
  10. M.P. Garg, Ajai Jain & Gian Bhushan, “An investigation into dimensional deviation induced by wire electric discharge machining of high temperature titanium alloy.” Journal of Engineering & Technology, Vol. 2, No.2, July –December 2012, pp. 104-112.

International Conferences: 19

  1. G. Bhushan, S.S. Rattan & N.P. Mehta, “Hydrodynamic lubrication analysis of four-lobe pressure dam bearings by finite-element method.” Proceedings 2nd International & 29th National Conference on Fluid Mechanics & Fluid Power, IIT Roorkee, December 12-14, 2002, pp 91-104.
  2. G. Bhushan, S.S. Rattan & N.P. Mehta, “Effect of turbulence on the performance of a four-lobe bearing.” Tribology - 2006, Institution of Mechanical Engineers, London, July 12-13, 2006.

  3. Bhupender Sharma, Gian Bhushan & R Vasudevan, “Heat transfer enhancement in plate fin heat exchanger using vortex generator.” Proceedings 3rd International Conference on Advances in Mechanical Engineering, SVNIT Surat, India, Jan. 4-6, 2010, pp.183-187.

  4. G. Bhushan, S.S. Rattan & Saurabh Gupta, “Effect of groove angle on the performance of a four-lobe bearing.” Proceedings IETET-2010, GIMT, Kurukshetra, October 14-16, 2010, pp. 605-609.

  5. M.P. Garg, Ajai Jain & Gian Bhushan, “Investigation of the effect of process parameters in wire EDM of high temperature Titanium alloy 6-2-4-2.” Proceedings 5th International Conference on Advances in Mechanical Engineering (ICAME-2011), SVNIT Surat, India, June 06-08, 2011, pp 626-630.

  6. Gulshan Sachdeva, Bhupender Sharma & Gian Bhushan, “Numerical study considering the location effects of wing type vortex generator on heat transfer enhancement.” Proceedings International conference on Thermal Engineering, WASET, Paris (France), July 27-29, 2011, pp. 919-923.

  7. Bhupender Sharma, G. Sachdeva & Gian Bhushan, “Effect of location of winglet type vortex generator on heat transfer enhancement in compact heat exchanger.” Proceedings 21st National & 10th ISHMT –ASME Heat and Mass Transfer Conference, IIT Madras, Dec 27-30, 2011, pp 1-6.

  8. Vinkel Arora, Gian Bhushan & M.L. Aggarwal , “A comparative study of standard and casted eye design of a mono leaf spring.” International conference on Recent Advances in Mechanical Engineering (INCRAME), Dr.MGR University, Chennai, April 19-20, 2012, pp 55-62.

  9. Vikas Salyan, G. Bhushan & P. Chandna, “Finite Element Analysis of a Disc Brake using Radioss Linear.” International Conference on Manufacturing Excellence (MANFEX 2012), Amity University, Noida, March 29-30, 2012, pp 29-31.

  10. Krishan Kumar, Vinkel Arora, Gian Bhushan, M.L. Aggarwal, “CAE simulation approach for static and dynamic analysis of leaf springs.”3rd International Conference on Production and Industrial Engineering (CPIE-2013), NIT Jalandhar, March 29-31,2013, pp 143-153.

  11. Deepak Chhabra, Gian Bhushan & Pankaj Chandna, “Multilevel Optimization for the Placement of Piezo actuators on Plate Structures for Active Vibration Control using Modified Heuristic Genetic Algorithm.” Proc. SPIE 9059, Industrial and Commercial Applications of Smart Structures Technologies 2014, 90590J, March 10, 2014, doi: 10.1117/12.2044913.

  12. Sunil Dhingra, Gian Bhushan & Kashyap Kumar Dubey, “ Outcome of Mahua based biodiesels along with their blends on the performance, combustion and emission parameters in CI engines”, AMI 2013, MDU Rohtak, November 17-30.

  13. Bhagel Singh & Gian Bhushan, “Finite Element Analysis of Forged Ramshorn Hook using CAE Tools.” International Conference on Advances in Dynamics, Vibration and Control (ICADVC 2016), NIT Durgapur, February, 25-27, pp. 388-394, 2016.

  14. Harsh Kumar & Gian Bhushan, “Finite Element Analysis of a Multi-Leaf Parabolic Leaf Spring using CAE Tools.” International Conference on Advances in Dynamics, Vibration and Control (ICADVC 2016), NIT Durgapur, February, 25-27, pp. 382-388, 2016.

  15. G. Bhushan, S Dingra & K.K Dubey, “Performance evaluation of karanja oil based biodiesel engine using modified genetic algorithm.”!8th International Conference on Mechatronics, Electrical and Mechanical Engineering, Kuala Lumpur, Malaysia, August-18-19, 2016, pp. 2601-2604.

  16. Ashok Kumar Verma, Gian Bhushan & Pankaj Chandna, “Finite element analysis of a Crosby shank hook using CAE tools.” IV International Conference on Production and Industrial Engineering (CPIE-2016), NIT Jalandhar, Dec. 19-21, 2016.

  17. Ankur Kumar, Gian Bhushan & Pankaj Chandna, “Finite element analysis of C channel of a clamp using CAE tools.” IV International Conference on Production and Industrial Engineering (CPIE-2016), NIT Jalandhar, Dec. 19-21, 2016.

  18. Vinkel Kumar Arora, Gian Bhushan & M L Aggarwal, “Optimization of design parameters for enhancing fatigue life of a symmetric leaf spring” IV International Conference on Production and Industrial Engineering (CPIE-2016), NIT Jalandhar, Dec. 19-21, 2016.

  19. Nausad Khan, Gian Bhushan & Pankaj Chandna, “Design and analysis of Ramshorn hook with different cross sections using CAE tools.” Proceedings of 2nd International Conference on Engineering Technolgy, Science and Management Innovation 2017 (ICETSMI 2017), NITTR Chandigarh, Jan. 15, pp. 213-220, 2017.

National Conferences: 38

  1. Gian Bhushan & D.S. Kumar, “Effect of suction lift on the performance of a centrifugal pump.” Presented at 40th ISTAM Congress, MACT Bhopal, December 14-17, 1995.
  2. Gian Bhushan & D.S. Kumar, “Suction lift and cavitation in centrifugal pump.” Proceedings of national symposium Recent Trends in Theoretical & Applied Mechanics, NIT Kurukshetra, November 15, 1997.
  3. G. Bhushan, S.S. Rattan & N.P. Mehta , “Effect of turbulence on the performance of inverted three-lobe bearings with rigid and flexible rotors.” Proceedings 28th National Conference on Fluid Mechanics & Fluid Power, PEC Chandigarh, December 13-15, 2001, pp 113-117.
  4. G. Bhushan, S.S. Rattan & N.P. Mehta, “Performance of four-lobe pressure dam bearings.” Presented at 46th congress of ISTAM NIT Hamirpur, December 19-22, 2001, pp 195-199.
  5. N .K. Singh, Gian Bhushan & S. Angra, “Need for renewable sources of energy: an overview.” Proceedings of IE(I), Haryana State Centre, AIS on PESG, 20-21 Feb. 03, CSRE, Murthal.
  6. Gian Bhushan, S.S. Rattan & Yogendra Singh, “Energy audit in a thermal power station- a case study.” Proceedings NCEET – 2003, March 28-29, 2003, NIT Hamirpur.
  7. G. Bhushan, S.S. Rattan & N.P. Mehta Effect of load orientation on the performance of four-lobe pressure dam bearings. Proceedings NC 2004, PCCE Verna, Goa, September 10-12, 2004, pp 223-228.
  8. G. Bhushan, S.S. Rattan & N.P. Mehta, “ Effect of L/D ratio on the performance of a four-lobe bearing.” All India Seminar on Emerging Trends in Mechanical Engg., NIT Kurukshetra, March 29-30, 2005, pp 158-162.
  9. Pankaj Chandna, Gian Bhushan, V.P. Singh, Devender Kumar & Amit Sarna, “FEA of a Bus Body Structure using HyperWorks Tools.” 4th India/ASEAN HyperWorks Technology Conference 2008, July 31-August 2, 2008, Bangalore.
  10. Gian Bhushan, Pankaj Chandna, Krishan Kumar & Vinkel arora, “ Computer aided engineering analysis of a conventional leaf spring.” Proceedings National Conference on Advanced Manufacturing Techniques NCAMT 2009, SMVDU Katra, J&K, November 5-6, 2009, pp 244-249.
  11. Pankaj Chandna & Gian Bhushan, “Challenge of acceptability.” The Delegate Handbook, Indian Energy Congress 2010, April 6-7, 2010, New Delhi.
  12. Gian Bhushan, Pankaj Chandna & Sumit Babbar, “Finite Element Analysis of Heat Sink of a Tail Lamp using Radioss Linear.” National Conference on Advancements & Futuristic Trends in Mechanical and Industrial Engineering AFTMIE - 2010, GITM, Bilaspur, Haryana, November 12-13, 2010, pp 215-218.
  13. Dharamvir Mangat, Pankaj Chandna & Gian Bhushan, “Lateral Transshipment- An Automobile Industry Perspective.” National Conference on Advancements &Futuristic Trends in Mechanical and Industrial Engineering AFTMIE - 2010, GITM, Bilaspur, Haryana, November 12-13, 2010, pp 413-416.
  14. Hardial Singh & Gian Bhushan, “Finite Element Analysis of a Front Lower Control Arm of a LCV using Radioss Linear.” National Conference on Advances in Manufacturing Technology, NITTTR Chandigarh, March 15-16, 2012, pp121-125.
  15. Vinkel Arora, Gian Bhushan & M.L. Aggarwal, “A Comparative Study of Standard Eye and Riveted Eye Design of a Mono Leaf Spring.” National Conference on Emerging Trends in Mechanical Engineering (ETME-2012), ITM University, Gurgaon, 1st June, 2012, pp. 49-55.
  16. Rahul Sharma, Gian Bhushan & Pankaj Chandna, “FE analysis of forged steel connecting rod using CAE tools.” National Conference on Recent Trends in Chemical Engineering and Technology (RTCET-2014), NIT Hamirpur, May 29-30, 2014.
  17. Shrikanth Talewad, Gian Bhushan & Pankaj Chandna, “Material selection and stress analysis of a crane hook using CAE tools.” National Conference on Recent Trends in Chemical Engineering and Technology (RTCET-2014), NIT Hamirpur, May 29-30, 2014.
  18. Rahul Sharma, Gian Bhushan & Pankaj Chandna, “Modelling, Analysis and Optimization of a connecting rod using CAE tools.” Proceedings International Mechanical Engineering Congress (IMEC), NIT Trichy, June 13-15, 2014, pp. 41-44.
  19. Shrikanth Talewad, Gian Bhushan & Pankaj Chandna, “Finite element analysis of several cross sections of a crane hook using CAE tools.” Proceedings International Mechanical Engineering Congress (IMEC), NIT Trichy, June 13-15, 2014, pp. 45-49.
  20. Rahul Sharma, Gian Bhushan & Pankaj Chandna, “FE analysis of a LCV connecting rod using CAE tools.” Proceedings of 4th National Confernce on Advances in Manufacturing (RAM-2014), SVNIT Surat, June 26-28, 2014, pp. 230-234.
  21. Shrikanth Talewad, Gian Bhushan & Pankaj Chandna, “Finite element analysis of a crane hook.” Proceedings of 4th National Confernce on Advances in Manufacturing (RAM-2014), SVNIT Surat, June 26-28, 2014, pp. 241-244.
  22. Aggarwal I, Bhushan G & Chandna P, “Static structural analysis of SUP 11Amultileaf parabolic leaf spring.” National conference on mathematical Analysis and Computation, MNIT Jaipur, February 20-21, 2015.
  23. Ishaan Aggarwal, Gian Bhushan & Pankaj Chandna, “A comparative study of various eye designs of conventional leaf springs using CAE tools.” National conference on mathematical Analysis and Computation, MNIT Jaipur, February 20-21, 2015.
  24. Ishaan Aggarwal, Gian Bhushan & Pankaj Chandna, “A comparitive study of standard eye and upturned reinforced eye designs of conventional leaf springs using CAE tools.” National conference on Recent advances in manufacturing (RAM 2015), NIT Surat, May 15-17, 2015, pp 195-199.
  25. Aggarwal I, Bhushan G & Chandna P, “ Linear static structural analysis of military eye and reinforces eye ends of a parabolic leaf spring” National conference on Recent advances in manufacturing (RAM 2015), NIT Surat, May 15-17, 2015, pp 308-313.
  26. Harsh Kumar & Gian Bhushan, “FE Analysis of a Parabolic Leaf Spring with Different Composite Materials using HyperWorks.” 6th National Conference on Recent Advances in Manufacturing (RAM - 2016), SNIT Surat, May 12-14, pp. 296-301, 2016.
  27. Bhagel Singh & Gian Bhushan, “Stress Analysis of a Ramshorn Hook with Different Cross Sections using Finite Element Method.” 6th National Conference on Recent Advances in Manufacturing (RAM - 2016), SNIT Surat, May 12-14, pp. 302-307, 2016.
  28. Ashok Kumar Verma, Gian Bhushan & Pankaj Chandna, “Stress analysis of a Crosby Shank hook with different cross sections using finite element method Proceedings of national Conference on Advanced Materials and product Design 2017 (AMPD 2017), SNIT Surat, March 10-11, pp. 144-149, 2017.
  29. Vinkel Arora, Gian Bhushan & M.L. Aggarwal, “Desirability approach in RSM applied to symmetrical multi leaf spring,” 3rd National Conference on Trends & Advances in Mechanical Engineering (TAME-2017), YMCA university of Sc. & Technology, March 16-17, pp.178-184, 201
  30. Ashok Kumar Verma, Gian Bhushan & Pankaj Chandna, “Design and Analysis of a Crosby Shank Hook of Various Materials Using CAE Tools.” Proceedings of National Conference on Recent Advances in Mechanical Engineering 2017 (NCRAME 2017), NIT Kurukshetra, June 2-3, Vol.1, 2017,  pp. 49-51.  
  31. Nipun Kumar, Gian Bhushan & Pankaj Chandna, “Analysis of Knuckle Joint made of magnesium having different materials knuckle pin using CAE tools.” Proceedings of National Conference on Recent Advances in Mechanical Engineering 2017 (NCRAME 2017), NIT Kurukshetra, June 2-3, Vol.1, 2017, pp. 140-144. 
  32. Ankur Kumar, Gian Bhushan & Pankaj Chandna, “Stress analysis of C Channel of a clamp with different cross sections using CAE tools.” Proceedings of National Conference on Recent Advances in Mechanical Engineering 2017 (NCRAME 2017), NIT Kurukshetra, June 2-3, Vol. 2, 2017, pp. 153-158. 
  33. Nipun Kumar, Gian Bhushan & Pankaj Chandna, “Optimizing design of Knuckle Joint using CAE tools.” National Conference on Recent Advances in Mechanical Engineering 2017 (NCRAME 2017), NIT Kurukshetra, June 2-3, 2017.  
  34. Nausad Khan, Gian Bhushan & Pankaj Chandna, “Design and shape optimization of a Ramshorn hook using CAE tools using CAE tools.” Proceedings of National Conference on Recent Advances in Mechanical Engineering 2017 (NCRAME 2017), NIT Kurukshetra, June 2-3, Vol. 1, 2017, pp. 216-220. 
  35. Sushil Kumar, Pankaj Chandna & Gian Bhushan, “Investigation of friction stir welding parameters for Aluminium allo 6061-T6 using Taguchi technique.” Proceedings of National Conference on Recent Advances in Mechanical Engineering 2017 (NCRAME 2017), NIT Kurukshetra, June 2-3, Vol.1, 2017, pp. 225-228.
  36. Sushma Rani, Surjit angra, Vinod Kumar, Gian Bhushan & Anuj Kumar, “Effect of turbulence on the performance of three-lobe bearings.” Proceedings of National Conference on Recent Advances in Mechanical Engineering 2017 (NCRAME 2017), NIT Kurukshetra, June 2-3, Vol.2, 2017, pp. 101-104.
  37. Nausad Khan, Gian Bhushan & Pankaj Chandna, “Stress analysis of Ramshorn hook with different cross sections using Ansys & Winkler Beach Theory.” Proceedings of National Conference on Recent Advances in Mechanical Engineering 2017 (NCRAME 2017), NIT Kurukshetra, June 2-3, Vol. 2, 2017, pp. 153-158. 
  38. Gulshan Sachdeva, Bhupender Sharma & Gian Bhushan, “Enhancement of thermal –hydaulic performance of a plate fin heat exchanger using finite thickness wing type vortex generator.” Proceedings of National Conference on Recent Advances in Mechanical Engineering 2017 (NCRAME 2017), NIT Kurukshetra, June 2-3, Vol. 2, 2017, pp. 236-241.

Awards & Honours  

Received “The Sir Rajendra Nath Mookerjee Memorial Prize” for the best paper (details below) in the Journal of Institute of Engineers (India) for year 2002.        

G. Bhushan, SS Rattan & NP Mehta, “Effect of turbulence, ellipticity ratio & L/D ratio on the performance of four-lobe bearings with rigid and flexible rotors”. Journal of the Institution of Engineers (India), Vol. 83, July 2002, pp. 57-61.

 Membership of Professional Bodies 

  1. Associate Member, The Institute of Engineers (India) .
  2. Life Member, Tribology Society of India (TSI) 
  3. Member, South Energy Forum for Energy Efficiency (SAFEE) 
  4. Life Member, Indian Society for Technical Education (ISTE), applied for 
  5. Life Member, Indian Society of Theoretical and Applied Mechanics (ISTAM), applied for

Ph.D Supervised  

     Completed:   5

  1. Optimization of process parameters of wire EDM for machining of Titanium 6242 alloy. Mohinder Pal Garg, Reg. No. 2K06NITKPhD1100M, August 2014.
  2. Dynamic analysis of an inverted three lobe pressure dam bearing. Neel Kamal Batra, Reg. No. 2K06NITKPhD1109M, September 2014.
  3. Optimization of process parameters for biodiesel production from various oils and their performance analysis. Sunil Dhingra, Reg. No. 2K10NITKPhD1288M, July 2015
  4. Optimization of smart structures for active vibration control using piezoelectric sensors and actuators. Deepak Chhabra, Reg. No. 2K10NITKPhD1324M, Feb 2016
  5. Structural analysis and optimization of parameters for fatigue life enhancement of a symmetrical multi leaf spring. Vinkel Kumar Arora, Reg. No. 2K11NITKPhD1384M, Feb 2017

       In Progress:  5

M.Tech Dissertations

       Completed:  34

       In progress:  4

 

 Academic Activities

  • Developed CAD lab of Mech. Engg. Dept. along with Prof. VP Singh under TEQIP I. 
  • Member DRC (2008-2010, 2014 onwards) 
  • Member BOS (2014 onwards)
  • Participated in Curriculum revision of Mechanical Engg. Department at UG & PG level.
  • Coordinator, “Six week training course for newly recruited Sub Divisional Engineers of Public Health Engineering Department, Government of Haryana” conducted by Centre for Continue Education & External Collaboration (CCEEC), NIT Kurukshetra, December 20, 2010 to January 20, 2011.
  • Coordinator, “Faculty Empowerment Workshop”, NIT Kurukshetra, October 4-8, 2010.
  • Conference Secretary of the International Conference “EnviroEnergy 2009” organized by NIT Kurukshetra at Taj, Chandigarh, March19-21, 2009.
  • Coordinator, National Symposium “Emerging Trends in Mechatronics”, NIT Kurukshetra, December 27-28, 2007 .
  • Member Organising Committee, “National Workshop on Industry Institute Interaction (NWIII-07)”, organized by NIT Kurukshetra at Chandigarh, February 19-20, 2007.
  • Member Organising Committee, “All India seminar on Emerging Trends in Mechanical Engineering (ETME-2005)”, NIT Kurukshetra, March 29-30, 2005.
  • Attended 40 workshops/conferences/STC/symposium etc.

Administrative Contributions at Departmental Level

  1. Prof-in-charge Mech. Soc. (2009-2014) .
  2. Member Departmental Purchase Committee (2009 -2015)
  3. Member admission committee for PG (2007-2014)
  4. Chairman Departmental Purchase Committee (2016 onwards)

Administrative Contributions at Institute Level

  1. Warden of hostels H-2 & H-4 (2006-07 & 2009-10)  
  2. Teacher-in-Charge (Music & Dramatic Club, 2002-2008) 
  3. Teacher-in-charge (Sports, 2006 - till date)) 
  4. Observer NIMCET -2010 
  5. Centre Superintendent Examinations at Centre I (May/June 2011) 
  6. Coordinator CCEEC (2010-2011)
  7. Prof-in-charge CCEEC (2011 -2014)
  8. Deputy Chief Warden, Boys Hostel (2014 - 2017)