National Institute Of Technology,Kurukshetra

DEPARTMENT OF MECHANICAL ENGINEERING

Faculty

Name : Joy Prakash Misra
Designation : Assistant Professor
Qualification : Ph.D. in Mechanical Engineering from Indian Institute of Technology Roorkee in 2014
Current Address : Phone 1 (office) : +91-7206169697
Phone 2 (office) :
Email : jpmishra@nitkkr.ac.in

Area Of Interest :

Machining Science, Advanced Manufacturing Processes, Optimization Techniques

Experience :

Other :

Publications  (Please see annexure for list of selected publications)

  • Book Chapters: 3
  • Journals: 18 ?     Conferences: 22

Lectures Delivered

  • Expert Lecture on Hybrid Machining during Short Term Course on CAD/CAM & Advanced Machining at MNNIT Allahabad, India.

Annexure: List of Selected Publications

2009

  • Misra, J. P., Sharma, A. K. and Jain, N. K. Design of Experiments for Electrochemical Honing of Helical Gears. Proceedings Of International Conference on Emerging Research and  Advances in Mechanical Engineering, Velammal Engineering College, 19-21 March, 2009, Chennai, India, 874-878. 
  • Misra, J. P., Jain, N. K., and Sharma, A. K. Effect of finishing time and electrolyte on precision finishing of helical gears by electrochemical honing (ECH) process. Proceedings of 6th International Conference on Precision, Meso, Micro and Nano Technology (COPEN 6), PSG College of Technology, 11-12 December, 2009, Coimbatore, India, F24 -F29.

2010   

  • Misra, J. P., Jain, N. K., and Jain, P. K. Investigations on Precision Finishing of Helical Gears by Electrochemical Honing (ECH) Process, Proc. IMechE, Part B: J. Engineering Manufacture, 2010, Vol. 224, No. 12, 1817-1830.
  • Misra, J. P., Singh, H., Jain, P. K. and Jain, N. K. Parametric Optimization of Pulse-Electrochemical Honing (PECH) Process by Response Surface Methodology. Proceedings of 4th International Conference on Advances in Mechanical Engineering, SVNIT, 23-25 September, 2010, Surat, India, 331-335.
  • Misra, J. P., Singh, H., Jain, P. K., and Jain, N. K. Precision Finishing of Spur Gears by Electrochemical Honing Process under Pulse Current Condition. Proceedings of International Symposium on Electrochemical Machining Technology, Vrije University, 4-5 November, 2010, Brussel, Belgium, 83-88.
  • Misra, J. P. and Jain, P. K. Experimental Investigation on Precision Finishing of Spur Gears by Pulse Electrochemical Honing (PECH) Process. Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium, Vol. 21, No. 1, 1051-1052.
  • Shandilya, Pragya, Jain P. K. and Misra, J. P. Experimental  Investigation During Wire Electric Discharge Cutting of SiCp/6061 Aluminium Metal Matrix Composite, Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium, Vol. 21, No. 1, 1091-1092.

2011

  • Misra, J. P., Jain, P. K., and Dwivedi, D. K. Electrochemical Honing - A Noble Technique for Gear Finishing. DAAAM International Book 2011, Chapter 29, 365-382.
  • Misra, J. P., Singh, H., Jain, P. K. and Jain, N. K. Parametric Optimization of Pulse-Electrochemical Honing (PECH) Process by Response Surface Methodology, International Journal of Manufacturing Technology and Industrial Engineering, 2011, Vol. 1, No. 2, 137-143.
  • Misra, J. P., Jain, P. K., and Dwivedi, D. K. Precision Finishing of Gears by Electrochemical Honing (ECH) Process: A State of Art Review, Journal of Advanced Manufacturing Systems, 2011, Vol. 10, No. 2, 309-327.
  • Jerripothu, P., Jain, P. K., Mehta, N. K. and Misra, J. P.  Effect of Processing Time in High-Precision Finishing of Helical Gear by Pulse-Electrochemical Honing (PECH) Process. Manufacturing Technology Today, Vol. 10, No. 2, 3-

9.

  • Misra, J. P. and Jain, P. K. Electrochemical Honing- An Advanced Gear Finishing Process. Manufacturing Technology Today, Vol. 10, No. 5, 23-30.
  • Misra, J. P., Jain, P. K. and Dwivedi, D. K. Optimization of Process Parameters to Predict the Surface Quality of Gear Teeth Profile Generated by Electrochemical-Mechanical Process using RSM and SA. Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium, Vol. 22, No. 1, 721-722.
  • Misra, J. P., Jain, P. K. and Dwivedi, D. K. Prediction of Surface Improvements of Gear Teeth Profile in ECH of Helical Gears using RSM and ANN. Proceeding of International Conference on Computational Methods in Manufacturing, IIT Guwahati, 15-16 December, 2011, Guwahati, India, 368-376.

2012

  • Misra, J. P., Jain, P. K., and Sevak, R. ECH of Spur Gears - A Step Toward Commercialization. DAAAM International Book 2012, Chapter 17, 197-212.
  • Misra, J. P., Singh, H., Jain, N. K., and Jain, P. K. Effects of Electrolyte Composition and Electrolyte Temperature on Precision Finishing of Spur Gears by Pulse- Electrochemical Honing  (PECH) Process, International Journal of Precision Technology, 2012, Vol. 3, No. 1, 37-50.
  • Misra, J. P., Jain, P. K., and Singh, H. Experimental Investigation of Precision Finishing of Spur Gears by Pulse Electrochemical Honing (PECH) Process, International Journal of Machining and Machinability of Materials, 2012, Vol. 11, No. 4, 405-417.
  • Naik, R., and Misra, J. P. Parametric Optimization of ECH of Spur Gears by Taguchi Technique, International Journal of Materials and Product Technology, 2012, Vol. 43, No. 1/2/3/4, 84-101.
  • Das, A. and Misra, J. P. Surface Modification of Aluminium by Electro-Discharge Coating Process Using Tic/Cu Green Compact Tool Electrode, Machining Science and Technology, 2012, Vol. 16, No. 4, 601-623.
  • Misra, J. P., Jain, P. K., Dwivedi, D. K. and Mehta, N. K. Study of Electrochemical-Mechanical Finishing of Bevel Gears. Fourth International and Twenty Five All India Manufacturing Technology Design and Research Conference, Jadavpur University, 14-16 Decemebr, 2012, Kolkata, India, 423-427.

2013

  • Misra, J. P., Jain, P. K. and Dwivedi, D. K. Parametric Optimization of Electrochemical Honing of Helical Gears by Response Surface Methodology and Genetic Algorithm, Advanced Materials Research, 2013, Vol. 622-623, 86-90.
  • Misra, J. P., Jain, P. K., Dwivedi, D. K. and Mehta, N. K. Mixture D-Optimal Design of Electrolyte Composition in ECH of Bevel Gears, Advanced Materials Research, 2013, Vol. 685, 347-351.
  • Misra, J. P., Jain, P. K., Dwivedi, D. K. and Mehta, N. K. Study of Time Dependent Behaviour of ECH of Bevel Gears. Procedia Engineering, 2013, Vol. 64, 1259-1266.
  • Misra, J. P., Jain, P. K., Dwivedi, D. K. and Mehta, N. K. Study of Bevel Gear Finishing by Abrasive Bonded Gear. Manufacturing Technology Today, Vol. 12, No. 1, 5-11.
  • Misra, J. P., Jain, P. K., Dwivedi, D. K. and Mehta, N. K. Study on Influence of Electrolyte Related Parameters on Tribological Performance of Electrochemical Honed Bevel Gears. COPEN-8, NIT Calicut, 13-15 December, 2013, Calicut, India, 481-485.

2014

  • Misra, J. P., Jain, P. K., Dwivedi, D. K. and Mehta, N. K. A Study of Influence of Electrolyte Composition on ECH of Bevel Gears using Mixture D-Optimal Design. Journal of Mechanical Engineering and Sciences, 2014, Vol. 6, 753761.
  • Misra, J. P., Jain, P. K., Dwivedi, D. K. and Mehta, N. K. Study of Electrochemical-Mechanical Finishing of Bevel Gears. International Journal of Manufacturing Technology and Management, 2014, Vol. 27, No.4-6, 154-169.
  • Misra, J. P., Jain, P. K., Dwivedi, D. K. and Mehta, N. K. Empirical Modelling of MRR In ElectrochemicalMechanical Finishing Of Bevel Gears. Fourth International and Twenty Five All India Manufacturing Technology Design and Research Conference, IIT Guwahati, 12-14 December, 2014, Guwahati, India, 426-1-426-6.

2015

  • Verma, S. and Misra, J. P. A Critical Review of Friction Stir Welding Process. DAAAM International Book, 2015, Chapter 22, 249-266.
  • Misra, J. P., Jain, P. K., Dwivedi, D. K. and Mehta, N. K. Prediction of Tribological Performance of Electrochemical Honed Bevel Gears Teeth Profile. International Journal of Surface Science and Engineering, 2015, Vol. 9, No. 1, 26-42.

2016

  • Das, A. and Misra, J. P. Modelling and Parametric Optimization of Deposited Layer Thickness in Electric Discharge Coating Process. International Journal of Surface Science and Engineering, 2016, Vol. 10, No. 3, 253-271.
  • Misra, J. P., Jain, P. K., Dwivedi, D. K. and Verma, S. Empirical Modelling of Surface Quality in ElectrochemicalMechanical Finishing of Bevel Gears. International Journal of Machining and Machinability of Materials, 2016, Vol. 18, No. 4, 350-364.
  • Verma, S., Meenu and Misra, J. P. Study on temperature distribution during Friction Stir Welding of 6082 aluminum alloy. 5th International Conference on Material Processing and Characterization, GRIET, 12-13 March, 2016, Hyderabad, India.
  • Singh, T., Misra, J. P. and Singh, B. Experimental Investigation of Influence of Process Parameters on MRR during WEDM of Al6063 alloy. 5th International Conference on Material Processing and Characterization, GRIET, 12-13 March, 2016, Hyderabad, India.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  • Keynote Lecture on Electrochemical Honing Process during National Conference on Advances in Manufacturing Systems at SBSSTC, Ferozepur, India.
  • Invited Talk on Research Methodology in Mechanical Engg. Dept., SBSSTC Ferozpur, India.
  • Expert Lecture on Hybrid Machining Processes and its Applications in Mechanical Engg. Dept., NITTTR Chandigarh, India
  • Expert Lecture on Introduction to Advanced and Hybrid Machining Processes in Mechanical Engg. Dept., Z.H.College of Engineering and Technology, Aligarh Muslim University, Aligarh, India
  • Expert Lecture on Tips for Better Presentation in Mechanical Engg. Dept., National Institute of Technology Kurukshetra, Kurukshetra, India.

 

Memberships

  • Member, DAAAM International Vienna
  • Fellow Member, Science and Engineering Institute USA
  • Member, International Association of Computer Science and Information Technology (IACSIT), Singapore ? Life Member, Association of Engineers, India.

 

Honors and Awards

  • MHRD Scholarship from 2007-2009.
  • Reviewer of Machining Science and Technology (Taylor & Francis), International Polymer Processing, Engineering Science and Technology, an International Journal (Elsevier), International Journal of Advanced Manufacturing Technology
  • Nominated as Member of DAAAM Young Researchers’ and Scientists’ International Committee for 2010, 2011, 2012 and 2013