National Institute Of Technology,Kurukshetra

DEPARTMENT OF MECHANICAL ENGINEERING

Faculty

Name : Dinesh Khanduja (Head of Department)
Designation : Professor
Qualification : Ph D (2003), NIT, Kurukshetra University, Kurukshetra
Current Address :

510/13. Urban Estate, Kurukshetra, Haryana (136118)

Phone 1 (office) : (01744) 233455
Phone 2 (office) : 09466960961
Email : dineshkhanduja@yahoo.com; khandujad@nitkkr.ac.in

Area Of Interest :

  • Six Sigma;
  • Entrepreneurship Development and Business Incubation;
  • TQM,
  • Industrial Engineering and Management
  • Composite Materials

 

Experience :

Teaching Experience: 33 years 

  • SN

    Name of Institution

    Position

    Date of Joining

    From

    To

    1

    ISGEC, Yamunanagar

    Engineer Trainee

    26-06-86

    06-10-86

    2

    NIT, Kurukshetra

    Lecturer

    06-10-86

    20-10-94

    3

    NIT, Kurukshetra

    Assistant Professor

    21-10-94

    31-12-05

    4

    NIT, Kurukshetra

    Associate Professor

    01-01-06

    30-06-09

    5

    NIT, Kurukshetra

    Professor

    01-07-09

    Till Date

Other :

Membership of Academic bodies & Professional Societies

  • Indian Institution of Industrial Engineering Mumbai
  • Society for Fusion of Science and Technology New Delhi

Positions of Administrative Responsibility held in the Institute

  • Professor In charge (continuing education): 2007-2008.
  • Course Director (Finishing School Programme): 2007-2008.
  • Professor-In-Charge (Industry-Institute-Partnership Cell): 2009-2011.
  • Professor-In-Charge (Entrepreneurship Development Cell): 2011-2013.
  • Co-Coordinator, TEQIP - II (Industry-Institute-Interaction): 2013-2014.
  • Coordinator (Foreign Student Cell): 2017-2018.
  • Chairman, Institute Purchase Finalization Committee: 2017- Till Date.
  • Head of Department (Mechanical Engineering); Nov. 2018 – Till Date

Short Term Courses/Workshops/Conferences Organized

  • Organized a two-week FDP on ,'Entrepreneurship Awareness Program for Faculty' from June 25, 2007 to July 4, 2007.
  • Organized a two-day Workshop on ,'Preparing Young Women for Enterprising Future', from November 13, 2007 to November 14, 2007.
  • Organized a two-day Workshop on ,'Entrepreneurship Awareness for Technically Qualified Unemployed Youth', from November 27, 2007 to November 28, 2007.
  • Organized a two-day Workshop on ,' Impact of TEQIP & Excellence in Engineering. Education', from December 24, 2007 to December 25, 2007.
  • Organized a two-week FDP on ,' Strategic Aspects of Entrepreneurship Development in Technical Education', June 30, 2008 to July 11, 2008.
  • Organized a six-week Business Skill Development Program for engineering students, February 3, 2011 to March 11, 2011.
  • Organized a two day Entrepreneurship and Business Skill Development Program, 'E-Summit' for engineering students, April 28, 2012 to April 29, 2012.
  • Organized one-day Workshop on ,'Design Sensitization for Engineering Students', on August 28, 2012.
  • Co-Patron of National Conference on Internal Combustion Engines and Combustion, from November 1, 2019 to November 4, 2019.

Short Term Courses/Workshops/Conferences Attended

  • Attended 9-week, ' Entrepreneurship Development Program' (by IDBI), at NIT, Kurukshetra from March 16 - May 18, 1991.
  • Attended one week, ' Winter School on Performance Appraisal and Development Systems', at NIT, Kurukshetra from Feb 24 - Feb 28, 1997.
  • Attended one week, ' Winter School on Quality Philosophies and Techniques Practiced around the World ', at MNIT, Jaipur from Dec 15-Dec 20, 1997.
  • Attended one week, ' STP on Improving Industry Institute Interaction', at NITTTR, Chandigarh, from March 8 - March 12, 2004.
  • Attended three week, ' Entrepreneurship Awareness Program for Faculty', at NIT Kurukshetra, from June 25 - July 7, 2007.
  • Attended two-day 'National Seminar on Advance Manufacturing Techniques', at Graphic Era University, Dehradun, from Nov. 18-Nov. 19, 2010.
  • Attended one-day 'Workshop on Siemens COE for Industry Relevance Skill Development', at NIT Kurukshetra, on March 10, 2018.
  • Attended one-day 'Workshop on Skill for Industry 4', at IIT, Delhi on October 11, 2019.

Special Lectures Delivered in Workshops/Short Term Courses

  • Six Sigma: Relevance in Service Sector; STC on Advances in Manufacturing; NIT, Kurukshetra; 21-10-16.
  • Entrepreneurial Traits among Engineers; FDP on Entrepreneurship; YMCA University, Faridabad; 08-12-17.
  • Rural Entrepreneurship in India; Guest Lecture; STP on Rural Development and Sustainability; NIT, Kurukshetra; 16-01-18.
  • Entreprteneurial Opportunities for Engineers (under TEQIP III by RTU, Kota); Yagyavalkya Institute of Technology, Jaipur, 12-03-18.
  • Women Entrepreneurship in India; National Conference on "Community Development"; J Vidyapeeth Women University, Jaipur; 29-04-18.
  • Quality Issues in Process Industry; STP on Contemporary Extents in Industrial Operations; NIT, Jallandhar; 08-12-19
  • Maintenance Issues in Process Industry; STP on Contemporary Extents in Industrial Operations; NIT, Jallandhar; 08-12-19

Ph.D. Thesis Supervised

  1. Six Sigma : From Concept to Application across Different Indian Industries; Prabhakar Kaushik; November 2010.
  2. Some Entrepreneurial Aspects of Technology Business Incubators in Indian Context; Sahib Sartaj; December 2010.
  3. Some Aspects of Total Quality Management in Technical Education : A Case Study of Haryana; Vineet Kumar; December 2010.
  4. Some Six Sigma Imperatives for Indian Foundries : A Case Study; Bikramjeet Singh; March 2013.
  5. An Integrated Framework for QFD Driven Total Quality Management in Service Industry : A Case Study in Education Sector; Rajdeep Singh; December 2014.
  6. A Geometric Modeling Scheme to Develop Traditional Indian Ornamental Designs; Vineet Kumar Goel; March 2015.
  7. Implementing TQM for Competitiveness : An Analysis using Flexible Systems Methodology; Nitin Singla; March 2016.
  8. Mechanical Characterization and Wear Optimization of Aluminium Based Hybrid Composite; Pardeep Sharma; August 2016
  9. Some Six Sigma Imperatives for Capacity Waste Management in Indian Auto Sector : A Case Study; Rajeev Rathi; February 2017
  10. Lean and Green Manufacturing : Concept, Trends and Practices in Foundry Industry for Productivity Improvement; Suresh Prasad; February 2017
  11. Integrating Risk Analysis and Agile Thinking for Selection of Maintenance Strategy : Some Case Studies in Indian Process Industry; Priyank Srivastava; September 2018.
  12. Performance Evaluation, Availability Analysis and Optimization of Various Repairable Systems of A Textile Industry; Rajiv Kumar; June 2018
  13. Studies on Induction Hardening of Fe-Cr/Mo Alloys Processed via Powder Metallurgy Route; Sandeep; July 2018
  14. Availability Improvement through Six Sigma: An Integrative Approach in Process Industry; Pardeep Kumar; August 2018
  15. Integrating Shainin System and Fuzzy MADM Approach for Process Improvement: Some Evaluations; Kapil Mittal; February 2020
  16. Synergy of Six Sigma and Capacity Waste Management for Indian Thermal Power Plants : A Case Study; Pawan Jaglan; SUBMITTED

M Tech Dissertations Supervised (last 10 years)

  1. Some Quality Dimensions of DOE in Welding Industry., Anil Kumar; 2010
  2. Ambience of Quality Circles in Manufacturing Industries; Pradeep Rana; 2011
  3. Quality Improvement through APQP- A Case Study; Kapil Mittal; 2011
  4. Productivity Management with Six Sigma in Small Industries- A Case Study; PawanJaglan; 2011
  5. Some Value Stream Mapping Imperatives for Job Production Systems; Hardeep; 2011
  6. Some Aspects of Energy Management- A Case Study, Gyander; 2011
  7. Productivity Mapping in Service Sector- A Case Study; Bijender; 2012
  8. Quality Management through Six Sigma; Ayush Sangal; 2012
  9. Impact of Lean Tools on Manufacturing Performance; Kapil Dev; 2013
  10. Lean Manufacturing Relevance in Auto Sector; Ram Niwas; 2013
  11. Some TPM Practices in Auto Sector; Viswash Yadav; 2013
  12. APQP as a Quality Management Strategy- A Case Study; Norma; 2014
  13. COPQ Reduction through Six Sigma- A Case Study; Sourabh Kumar; 2014
  14. Exploring Quality Management with Six Sigma in Auto Sector- A Case Study; Amit Kumar Singh; 2014
  15. Feasibility Analysis of Solar Energy: An Exploration with Some MADM Approach; Amritpal Singh; 2015
  16. Exploring and Proculizing Hydro Potential of Indian States, using Fuzzy Topsis Methodology; Amit Kumar; 2017
  17. Feasibility of Hydro Power in India: An Exploration with Some MADM Approaches; Monu; 2017
  18. PO-P Approach for Productivity Evaluation in Manufacturing Industry: A Case Study; Gaurav Yadav; 2018
  19. Performance Evaluation in Service Sector Using Topsis; Neeraj Saini; 2018
  20. Design for Six Sigma for Improving Fuel Efficiency Band Performance on Production Vehicle; Anoop; 2019
  21. Design for Six Sigma for Improving Fuel Efficiency Band Performance on Production Vehicle; Rahul Dahiya; 2019.  

Research Projects

A World Bank project under TEQIP - II, 'Entrepreneurship Development Potential of Polytechnic Education System In Haryana: Relevance, Analysis and Directions'; completed in 2008.

Books and Books Chapters

Book: 'Wrap the Scrap with DMAIC'; book published by Anchor Academic Publishing, Hermannstal, 22119 Hamburg, Germany (2015) (ISBN: 978-3-95489-395-9) (Co-Author: Bikram Jit Singh).

Book Chapters

  1. 'Strategic Role of Engineering Institutions for Entrepreneurship Development in India', Chapter 10, Entrepreneurial Management, Edited by S. Bhargava (IIT,Mumbai) and published by Sage Publications, New Delhi (2010).
  2. 'Exploring the Ambience of International Entrepreneurship among SMEs in India', Chapter 13, International Entrepreneurship (Volume I), Edited by Hamid Etemad and published by Elgar Publishers, US (pp 303 - 319) (2011).
  3. 'Concentrated Solar Power: A Vision for Rajasthan', Chapter 16, Progress in Sustainable Energy Technologies: Generating Renewable Energy, Edited by Ibrahim Dincer, Adnan Midilli and Haydar Kucuk, Springer International Publishing, Switzerland (ISBN 978-3-319-07895- (pp. 317-326) (Co-Author: Nishant Aggarwal) (2014).
  4. 'Value Stream Mapping: Powerful Tool for Lean Manufacturing', Chapter 18, Emerging Technologies (Volume II), (ISBN: 978-93-83842-56-8) (Co-Authors: Priyank Srivastava and V.P Agrawal).(201.
  5. Total Fuzzy Agility Evaluation Using Fuzzy Methodology: A Case Study, Harmony Search and Nature Inspired Optimization Algorithms, Volume 41, Springer, Singapore. (e-book) (pp. 999-1008). (Co-Authors: Priyank Srivastava, V.P Agrawal and Neeraj Saini) (2018).
  6. Risk Analysis of Water Treatment Plant Using Fuzzy-Integrated Approach, Harmony Search and Nature Inspired Optimization Algorithms, Advances in Intelligent Systems and Computing book series (AISC, Volume 741) (Co-Authors: Priyank Srivastava, Mohit Agrawal, Manik and Tulsian) (pp. 761 - 770) (2018)
  7. Reliability Analysis of CNG Dispensing Unit by Lambda-Tau Approach, Chapter 9, Operations Management and Systems Engineering, Lecture Notes on Multidisciplinary Industrial Engineering. Springer (Co-Authors: Priyank Srivastava, G. A. Narayanan, M. Agarwal and M. Tulsian) (pp. 153 - 168) (2019).

Publications in Journals (Selected)

  1. Khanduja Dinesh and Wani V P, Developing Technopreneurial Workforce for Sustenance of Small Scale Engineering Industries in India, World Journal of Organizational Dynamics, Vol. 1 (1), 2007, pp 34-41
  2. Kaushik Parbhakar and Khanduja Dinesh, Utilising Six Sigma for Energy Conservation – A Process Industry Case Study, International Journal of Six Sigma and Competitive Advantage, Vol. 4 (1), 2008, pp. 18-34.
  3. Khanduja Dinesh and Kaushik Parbhakar, Synergizing Entrepreneurship, Incubated Business and Socio-Economic Upliftment in Rural India, International Journal of Entrepreneurship and Small Business Vol. 6 (1), 2008, pp 68-79.
  4. Singh Rajdeep, Khanduja Dinesh and Chutani R. K., Customer Requirements and their Grouping for Successful Implementation of TQM in Technical Education, International Journal of Emerging Technologies and Applications in Engineering Technology and Sciences, Vol. 1, July-Dec. 2008, pp. 153-168.
  5. Khanduja Dinesh and Jyoti Khanduja, Incubating Rural business in India: A Strategic Choice for 21st Century, World Journal of Management and Economics, Vol. 2 (2), 2008, pp. 59-66.
  6. Kaushik Parbhakar and Khanduja Dinesh, DM Make Up Water Reduction in Thermal Power Plants Using Six Sigma DMAIC Methodology, The Journal of Scientific and Industrial Research (JSIR), Vol. 67 (1), 2008, pp. 36-42.
  7. Kaushik Parbhakar and Khanduja Dinesh, DMAIC Methodology: The Enigma of Six Sigma, The SCMS Journal of Indian Management, Vol. 5 (1), 2008, pp. 9-18.
  8. Khanduja Dinesh, Singla Vineet and Singh Rajdeep, Entrepreneurial Ambience of Engineering Education in India, International Journal of Indian Culture and Business Management, Vol. 2 (6), 2009, pp. 341-355.
  9. Kaushik Parbhakar and Khanduja Dinesh, Application of Six Sigma DMAIC Methodology in Thermal Power Plants: A Case Study, International Journal of Total Quality Management & Business Excellence (Taylor and Francis), Vol. 20 (2), February, 2009, pp. 197-207.
  10. Khanduja Dinesh and Kaushik Parbhakar, Exploring Education Driven Entrepreneurship in Engineering Graduates in India International Journal of Continuing Engineering Education and Life-Long Learning, Vol. 19 (2/3), 2009, pp. 256-270.
  11. Khanduja Dinesh, Wani V P and Singh S S, A Systems Model for Performance Appraisal in Small Manufacturing Industries, International Journal of Globalization and Small Business, Vol. 3 (1), 2009, pp. 41-54.
  12. Singh Rajdeep and Khanduja Dinesh, Customers’ Requirements Grouping: A Prerequisite for Successful Implementation of TQM in Technical Education, International Journal of Management in Education, Vol. 4 (2), 2010, pp. 201-215.
  13. Singh Bikramjit and Khanduja Dinesh, SMED: For Quick Changeovers in Foundry SMEs, International Journal of Productivity and Performance Management (Emerald), Vol. 59 (1), 2010, pp. 98-117.
  14. Singh Bikramjit and Khanduja Dinesh, SME Sector of Punjab (India): From Renaissance to Recession, International Journal of Indian Culture and Business Management, Vol. 3 (5), 2010, pp. 544-559.
  15. Singh Bikramjit and Khanduja Dinesh, DMAICT: A Road Map to Quick Changeovers, International Journal of Six Sigma and Competitive Advantage, Vol. 6 (1/2), 2010, pp. 31-52.
  16. Singh Bikramjit and Khanduja Dinesh, Synergy of Cross-Functional Process Mapping and SMED for Quick Changeovers: A Case Study, International Journal of Science, Technology & Management, Vol. 1 (2), 2010, pp. 107-117.
  17. Mittal Kapil, Kaushik Parbhakar and Khanduja Dinesh, ABQP- A Ladder to Success, The SCMS Journal of Indian Management, Vol. 7 (4), 2010, pp 87-92.
  18. Mittal Kapil, Khanduja Dinesh and Kaushik Parbhakar, APQP- A Management Tool, Journal of Management Stream, Vol. 1 (11), 2010, pp 5-7.
  19. Singh Bikramjit and Khanduja Dinesh, Enigma of ‘Six Sigma’ for Foundry SMEs in India: A Case Study, International Journal of Engineering, Management and Economics, Vol. 2 (1), 2011, pp. 81-105.
  20. Singh Bikramjit and Khanduja Dinesh, Introduce Quality Processes through DOE: A Case Study in Die Casting Foundry, International Journal of Productivity and Quality Management, Vol. 8 (4), 2011, pp. 373-397.
  21. Singh Bikramjit and Khanduja Dinesh, Does Analysis matter in Six Sigma? : A Case Study, International Journal of Data Analysis Techniques and Strategies, Vol. 3 (3), 2011, pp. 300-324.
  22. Jaglan Pawan, Kaushik Parbhakar and Khanduja Dinesh, Six Sigma for Energy Auditing: An Exploration, International Journal of Contemporary Practices, Vol. 1 (1), 2011, pp. 16-24.
  23. Singla Nitin, Singh T.P. and Khanduja Dinesh, Flexible Systems Methodology: A Driving Tool for TQM in Indian Industry, International Journal of Advances in Science and Technology, Vol. 2 (3), 2011, pp 59-68.
  24. Mittal Kapil, Khanduja Dinesh and Kaushik Parbhakar, Leveraging APQP Methodology to Drive Improvements in SMEs: A Case Study, International Journal of Contemporary Practices, Vol. 1 (1), 2011, pp. 38-51.
  25. Singh Bikramjit and Khanduja Dinesh, Demystifying MSA: A Structured Approach for Indian Foundry SMEs, International Journal of Quality and Innovation, Vol. 1 (3), 2011, pp. 217-236.
  26. Singh Bikramjit and Khanduja Dinesh, Design For Set-Ups: A Step towards Quick Changeovers in Foundries, International Journal of Sustainable Designs, Vol. 1 (4), 2011, pp. 402-422.
  27. Srivastava Priank, Khanduja, Aggarwal V P and Grover N, Agile Manufacturing: Concepts and Evolution, International Journal of Science and Advanced Technology, Vol. 1 (9), 2011, pp. 224-229.
  28. Singh, Bikramjit and Khanduja, D. Developing Operation Measurement Strategy during Six Sigma Implementation: A Foundry Case Study, International Journal of Advanced Operation Management, 2012, pp. 323-349
  29. Singh Bikramjit and Khanduja Dinesh, Essentials of D-Phase to Secure The Competitive Advantage through Six Sigma, International Journal of Business Excellence, Vol. 5 (1/2), 2012, pp. 35-51
  30. Singh, Bikramjit and Khanduja, D., Risk Management in Complex Changeovers through CFMEA: An Empirical Investigation, International Journal of Industrial and System Engineering, Vol. 10 (4), 2012, pp. 470-494.
  31. Mittal Kapil, Khanduja Dinesh and Kaushik Parbhakar, Evidence of APQP in Quality Improvement: An SME Case Study, International Journal of Management Science and Engineering Management, Vol. 7 (1), 2012, pp 20-28.
  32. Singh, Bikramjit and Khanduja, D., Scope of Six Sigma in Indian foundry operations: A Case Study, International Journal of Services and Operations Management (IJSOM), Vol. 13 (1), 2012, pp 65-97.
  33. Parbhakar Kaushik, Dinesh Khanduja, Kapil Mittal and Pawan Jaglan, Application of Six Sigma in a Small and Medium Sized Manufacturing Enterprise, The TQM Journal (Emerald), Vol. 24 (1), 2012, pp.4-16.
  34. Singh, Bikramjit and Khanduja, D., Ambience of Six Sigma in Indian foundry SMEs- An Empirical Investigation International Journal of Six Sigma and Competitive Advantage, 7 (1), 2012, pp 12-41.
  35. Jaglan Pawan and Khanduja, D., Capacity Waste at Thermal Power Plants in India: A Six Sigma Perception, International Journal of Six Sigma and Competitive Advantage, 8 (1), 2013, pp 22-33.
  36. P. C. Tewari, Rajiv Kumar and Dinesh Khanduja, Performance Modeling and Availability Analysis of Yarn Dyeing System of a Textile Industry, International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering, Vol. 7 (12), 2013, pp 90-94.
  37. Goel V.K., Tandon P., Khanduja D. and Garg T.K., Pattern Generation by Bubble Packing Method, International Journal of Research in Management, Science & Technology, Vol. 1 (1), 2013, pp 1-3.
  38. Pardeep Sharma, Dinesh Khanduja and Satpal Sharma, Tribological and Mechanical Behavior of Particulate Aluminium Matrix Composites, Journal of Reinforced Plastics and Composites, Vol. 33 (23), 2014, pp. 2192-2202.
  39. Pardeep Sharma, Dinesh Khanduja and Satpal Sharma, Metallurgical and Mechanical Characterization of Al 6082- B4C/Si3N4 Hybrid Composite Manufactured by Combined Ball Milling and Stir Casting, Journal of Applied Mechanics and Materials, Vol. 592-594, 2014, pp. 484-488.
  40. Sandeep, Ujjwal Prakash, P.C. Tewari and Dinesh Khanduja, Analysis of Powder Metallurgy Process Parameters for Relative Density of Low Carbon Alloy Steel Using Design of Experiments Tool, Journal of Applied Mechanics and Materials, Vol. 592-594, 2014, pp 72-76.
  41. Singh, Bikramjit and Khanduja, D., Perspectives of Control Phase to Manage Six Sigma, International Journal of Business Excellence, Vol. 7 (1), 2014, pp 88-111.
  42. Sandeep, Ujjwal Prakash, P.C. Tewari and Dinesh Khanduja, Ranking of Sintered Material for High Loaded Automobile Application by Applying Entropy-TOPSIS Method, Elsevier- Materials Today Proceedings, Vol. 2 2015, pp. 2375-2379.
  43. Sahib Sartaj Singh, Bikramjit Singh and Dinesh Khanduja, Synthesizing TBI Relevance in India through Six Sigma Approach, International Journal of Entrepreneurship and Innovation Management, Vol. 19 (3/4), 2015, pp. 256-283.
  44. Pardeep Sharma, Satpal Sharma and Dinesh Khanduja, On the Use of Ball Milling for the Production of Ceramic Powders”, Material and Manufacturing Process (Taylor and Francis Publication), Vol. 30, 2015, pp. 1370-1376.
  45. Pardeep Sharma, Satpal Sharma and Dinesh Khanduja, Parametric Study of Dry Sliding Wear Behavior of Hybrid Metal Matrix Composite Produced by a Novel Process, Metallurgical and Material Transactions (Springer Publication), Vol. 46 (7), 2015, pp. 3260-3270.
  46. P Sharma, Satpal Sharma and D Khanduja, A Study on Microstructure of Aluminium Matrix Composites, Journal of Asian Ceramic Societies (Elsevier Publication), Vol. 3 (3), 2015, pp. 240-244.
  47. Pardeep Sharma, Satpal Sharma and Dinesh Khanduja, Production and Some Properties of Si3N4 Reinforced Aluminium Alloy Composites, Journal of Asian Ceramic Societies (Elsevier Publication), Vol. 3 (3), 2015, pp. 352-359.
  48. Pardeep Sharma, Dinesh Khanduja and Satpal Sharma, Parametric Study of Dry Sliding Wear of Aluminium Metal Matrix Composites by Response Surface Methodology, Material Today: Proceedings (Elsevier Publication), Vol. 2 (4-5), 2015, pp. 2687-2697.
  49. Pardeep Sharma, Dinesh Khanduja and Satpal Sharma, Production of Hybrid Composite by a Novel Process and its Physical Comparison with Single Reinforced Composites, Material Today: Proceedings (Elsevier Publication), Vol. 2 (4-5), 2015, pp. 2698-2707.
  50. Pardeep Sharma, Dinesh Khanduja and Satpal Sharma, Dry Sliding Wear Investigation of Al6082/Gr Metal Matrix Composites by Response Surface Methodology, Journal of Material Research and Technology (Elsevier Publication), 2015 Online. pp. 1-9.
  51. Suman Saket, Amritpal Singh and D Khanduja, Fuzzy-VIKOR Analysis for Customer Performance Index of Civil Domestic Airline Industry in India, Management Science Letters, 5 (3), 2015, 301-310.
  52. Suman Saket, Amritpal Koura and Dinesh Khanduja, Barriers in Implementation of Solar Systems in India, Science and Technology International Research Journal, Vol. 1 (2), 2015, pp. 9-19.
  53. Rathi, R., Khanduja, D and Sharma, S.K., Six Sigma Project Selection Using Fuzzy TOPSIS Decision Making Approach. Management Science Letters, Vol. 5(5), 2015, pp. 447-456.
  54. Rathi, R., Khanduja, D and Sharma, S.K., Synergy of Fuzzy AHP and Six Sigma for Capacity Waste Management in Indian Automotive Industry. Decision Science Letters, Vol. 4, 2015, pp. 441-452.
  55. Rathi. R., Khanduja. D and Sharma. S.K., Six Sigma Perceptions for Capacity Waste Management in Indian Manufacturing Sector. Journal of Material Science and Mechanical Engineering, Vol. 2 (7), 2015, pp. 36-40.
  56. Pardeep Sharma, Satpal Sharma and Dinesh Khanduja, Effect of Graphite Reinforcement on Physical and Mechanical Properties of Aluminium Metal Matrix Composites, Particulate Science and Technology (Taylor and Francis Publication), Vol. 34 (1), 2016, pp. 17-22.
  57. Sandeep Chauhan, V. Verma, Ujjwal Prakash, P.C. Tewari and Dinesh Khanduja, Processing of Cr-Mo Alloy Steel via PM Route, Elsevier- Materials Today Proceedings, Vol. 3, 2016, pp. 2899-2903.
  58. Rathi, R., Khanduja, D and Sharma, S.K., Efficacy of Fuzzy MADM Approach in Six Sigma Analysis Phase in Automotive Sector, Journal of Industrial Engineering International (Springer), Vol. 12, 2016, pp. 377-387.
  59. Rathi, R., Khanduja, D and Sharma, S.K., A Fuzzy MADM Approach for Project Selection: A Six Sigma Case Study, Decision Science Letters, Vol. 5 (2), 2016, pp. 255–268.
  60. Kumar, P., Tewari, P.C. and Khanduja, D. (2016). Maintenance Priorities for a Repairable System of a Thermal Power Plant Subject to Availability Constraint. International Journal of Performability Engineering, Vol. 12, No.6, 2016, pp. 551-572.
  61. Rathi, R., Khanduja, D and Sharma, S.K., A Fuzzy-MADM Based Approach for Prioritizing Six Sigma Projects in Indian Auto Sector, International Journal of Management Science and Engineering Management, 2016, pp. 1-9.
  62. A Singh, Gaurav Vats and Dinesh Khanduja, Exploring Tapping Potential of Solar Energy: Prioritization of Indian States, Renewable & Sustainable Energy Reviews, Vol. 58, 2016, pp. 397–406.
  63. Suresh Prasad, Dinesh Khanduja and S.K. Sharma, A Study on Implementation of Lean Manufacturing in Indian Foundry Industry by Analyzing Lean Waste Issues, Journal of Engineering Manufacture (SAGE), e paper, 2016, pp. 1-8.
  64. Suresh Prasad, Dinesh Khanduja and S.K Sharma, Integration of SWOT Analysis with Hybrid Modified TOPSIS for the Lean and Green Strategy Evaluation, Journal of Engineering Manufacture, e paper, 2016, pp. 1295-1309.
  65. Suresh Prasad, Dinesh Khanduja and S.K. Sharma, An Empirical Study on Applicability of Lean and Green Practices in the Foundry Industry, Journal of Manufacturing Technology Management, Vol. 27 (3), 2016, pp. 408-426.
  66. Kapil Mittal, Puran Chand Tewari, Dinesh Khanduja and Prabhakar Kaushik, Application of Fuzzy TOPSIS MADM Approach in Ranking and Underlining the Problems of Plywood Industry in India, Cogent Engineering, Vol. 3, Online, 2016, pp. 1-11.
  67. Kapil Mittal, Puran Chand Tewari and Dinesh Khanduja, Refurbishing Business Processes: An Insight, Journal of Industrial Engineering and Advances, Vol. 1 (1), 2016, pp. 1-8.
  68. Pardeep Sharma, Satpal Sharma and Dinesh Khanduja, Production and Characterization of AA6082-(Si3N4+Gr) Stir Cast Hybrid Composites, Particulate Science and Technology (Taylor and Francis Publication), Vol. 35 (2), 2017, pp. 158-165.
  69. Sandeep Chauhan, V. Verma, Ujjwal Prakash, P.C. Tewari and Dinesh Khanduja, Analysis of Powder Metallurgy Process Parameters for Mechanical Properties of Sintered Fe-Cr-Mo Alloy Steel, Materials and Manufacturing Processes, Taylor and Francis, Vol. 32 (5), 2017, pp. 537-541.
  70. Sandeep Chauhan, V. Verma, Ujjwal Prakash, P.C. Tewari and Dinesh Khanduja, Studies on Induction Hardening of Powder-Metallurgy-Processed Fe–Cr/Mo Alloys, International Journal of Minerals, Metallurgy and Materials, Vol. 24 (8), 2017, pp. 918–925.
  71. Kapil Mittal, Puran Chand Tewari and Dinesh Khanduja, Productivity Improvement under Manufacturing Environment Using Shainin System and Fuzzy Analytical Hierarchical Process: A Case Study, International Journal of Advanced Manufacturing Technology, Cogent Engineering (Springer), Online, 2017.
  72. Kapil Mittal, Puran Chand Tewari and Dinesh Khanduja, On the Right Approach to Selecting a Quality Improvement Project in Manufacturing Industries, Operation Research and Decisions, Vol. 1, 2017, pp. 105-124.
  73. Kumar, P., Khanduja, D. and Tewari, P.C., Maintenance Strategy for a System in Thermal Power Plant. International Journal of Operations and Quantitative .Management, 23 (1), 2017, pp 101-118.
  74. Kumar, P., Tewari, P.C. and Khanduja, D., Six Sigma Application in a Process Industry for Capacity Waste Reduction: A Case Study. Management Science Letters, Vol. 7, 2017, pp. 423–430.
  75. P. Sharma, S. Sharma, R. Kumar Garg, K. Paliwal, D. Khanduja and V. Dabra, Effect of Graphite Content on Mechanical Properties and Friction Coefficient of Reinforced Aluminum Composites, Powder Metallurgy and Metal Ceramics, Vol. 56 (5-6), 2017, pp. 264-272
  76. Priyank Srivastava, Dinesh Khanduja and Vishnu P Agrawal, A Framework of Fuzzy Integrated MADM and GMA for Maintenance Strategy Selection Based on Agile Enabler Attributes, Mathematics-in-Industry Case Studies, Vol. 8 (5), 2017 (open access).
  77. Sandeep Chauhan, V. Verma, Ujjwal Prakash, P.C. Tewari and Dinesh Khanduja, Influence of Sintering Temperature and Cooling Rate on Microstructure and Mechanical Properties of Pre-Alloyed Fe-Cr-Mo Powder Metallurgy Steel, Transaction of Indian Institute of Metals, Springer Publication, online paper, June, 2017.
  78. P Sharma, K Paliwal, RK Garg, S Sharma, D Khanduja, A Study on Wear Behaviour of Al/6101/Graphite Composites, Journal of Asian Ceramic Societies, Vol. 5 (1), 2017, pp. 42-48
  79. Rajiv Kumar, P.C. Tewari and Dinesh Khanduja, Parameters Optimization of Fabric Finishing System of a Textile Industry using Teaching–Learning based Optimization Algorithm", International Journal of Industrial Engineering Computations, Vol. 9, 2018, pp. 1-14.
  80. Kapil Mittal, Puran Chand Tewari and Dinesh Khanduja, On the Fuzzy Evaluation of Measurement System Analysis in a Manufacturing and Process Industry Environment: A Comparative Study, Management Science Letters, Vol. 8, 2018, pp. 201-216.
  81. Priyank Srivastava, Dinesh Khanduja and Vishnu P Agrawal, Integrating Agile Thinking into Maintenance Strategy Performance Analysis, International Journal of Process Management and Benchmarking, Vol. 8 (2), 2018, pp. 228-245.
  82. P. Sharma, V. Dabra, S. Sharma, D. Khanduja, N. Sharma, R. Sharma, and K. Saini, Microstructure and Properties of AA6082/(SiC + Graphite) Hybrid Composites, Journal of Refractories and Industrial Ceramics, Vol. 59 (5), January, 2019, pp. 471-477.
  83. Srivastava, P., Khanduja, D., Mridul, Manik and Mohit, Risk Analysis of CNG Dispensing Unit by Fuzzy Digraph Matrix and Dempster-Shafer Approach, International Journal of Productivity and Quality Management, Vol. 1 (1), January, 2019, pp. 471-477.
  84. Srivastava, P., Khanduja, D. and S Ganesan, Fuzzy Methodology Application for Risk Analysis of Mechanical System in Process Industry, International Journal of System Assurance Engineering and Management, 2019.

Publications in Conferences (Selected)

  1. Preparing Tailor- Made-Women for Enterprising Future: A Case Study, National Seminar on Empowering the Masses through Technology Application and Skill Training, National Institute of Technical Teachers Training and Research, Chandigarh (Dec. 1-2, 2005)
  2. Entrepreneurial Opportunities to Engineering Students with Technology Business Incubators in Indian Context, International Conference on Mechanical Engineering in Knowledge Age, Delhi College of Engineering, Delhi (12-14 Dec. 2005).
  3. Strategic Role of Engineering Institutions for Entrepreneurship Developments in India, International Seminar on Creating Entrepreneurial Development and Developing Entrepreneurial Management, Indian Institute of Technology, Mumbai (16-18 March, 2006).
  4. Entrepreneurship among Indian Woman: An Empirical Study of Strategic Institutional Inputs, International Conference on Bridging the Gap: Entrepreneurship in Theory and Practice (EDGE Conference), Singapore Management University, Singapore (3-5 July, 2006).
  5. Entrepreneurial Ambience of Indo-British Technology Partnership: A Case Study of Rural Business Hubs in India, Second European Conference on Management of Technology (IAMOT), Aston Business School, Birmingham, United Kingdom (10-12 September, 2006).
  6. Incubating Entrepreneurship: Strategy for Economic Growth, International Research Conference on Entrepreneurship in Emerging Regions, Indian Business School, Hyderabad (Dec 5-7, 2006).
  7. Application of Six Sigma DMAIC Methodology in Technical Education, National Conference on Advances in Mechanical Engineering, YMCA Institute of Engineering, Faridabad (Dec 9-10, 2006).
  8. Six Sigma DMAIC Approach to Increase the Passing Rate of Students in Institutes, International Conference on Competitiveness in Global Manufacturing, NIT Jalandhar (March 22-24, 2007).
  9. Goal Programming for Productivity Appraisal in S Is: A Systems Approach, International Conference on Competitiveness in Global Manufacturing, NIT Jalandhar (March 22-24, 2007).
  10. Unfolding Entrepreneurial Attributes of Engineering Graduates In India: A Case Study, USF International Conference on Entrepreneurship, University of San Francisco, USA (27-30 March, 2007).
  11. Exploring Ambience of ‘International Entrepreneurship’ among SME’s in India, The Tenth Anniversary McGill Conference on International Entrepreneurship, UCLA School of Management, Los Angeles, USA (27-30 September, 2007).
  12. Entrepreneurship Development in India: A Six Step  Approach for Education System, The Fifth AGSE Entrepreneurship Research Exchange Conference, Canberra, Australia (Feb 3-6, 2008).
  13. Exploring Ambience of Education Driven Entrepreneurship in India, International Conference on Business Management, Bangkok, Thailand (21-23 May, 2008).
  14. The Ambience of Incubated Entrepreneurship in Indian Economy, The International Conference on Small Enterprises in Digital Age, Charles Sturt University, Sydney, Australia (15-17 Sep., 2008).
  15. Future of Incubated Entrepreneurship for Sustainable Development in India, 15th EDIC National Conference on Advances on Frontiers of Entrepreneurship, NITTTR, Chandigarh, (Nov 17-19, 2008).
  16. DMAIC(S): Incubates Core Competencies in Indian Foundry SMEs, Second International Conference on Industrial and Production Engineering, NIT Jalandhar (Dec 2-4, 2010). 
  17. Enhancing Competitiveness of Foundry SMEs through DFC: A Case Study, International Conference on Emerging Trends in Mechanical Engineering, Thapar University, Patiala, (24-25 Feb, 2011) 
  18. Agile Manufacturing System: Next Generation Manufacturing System, International Conference Simulation Modeling, BITS, Pilani, (November 10-12, 2011), pp 225-230.
  19. Education Driven Entrepreneurship in India: Relevance, Status and Directions, IJAS International Conference, Central Connecticut University Las Vegas, US (14-16 March, 2012).
  20. Empowering Women With Entrepreneurial Traits: A Task For Indian Education System, International Conference on Creating a Sustainable Business- Managerial Implications and Challenges, Jaipuria Institute of Management, Jaipur (December 7-9, 2012).
  21. Six Sigma for Sustainable Energy Management in Foundries: A Case Study, XVI Annual International Conference of the Society of Operations Management, IIT Delhi (Dec. 21-23, 2012).
  22. RAM Analysis of Some Process Industries: A Critical Literature Review, Third International Conference on Production and Industrial Engineering, NIT Jalandhar (March 29-31, 2013).
  23. Leveraging Six Sigma to Reduce Scrap in Indian Foundry SMEs, 26th SEAANZ International Conference on Small Business in Globally Competitive Markets, Sydney, Australia (11-12 July, 2013).
  24. APQP: A Strategy for Entrepreneurs to Improve Product Quality, International Conference on Technology and Business Management, American University, Dubai (18 - 20 March, 2014).
  25. Synergy of Six Sigma and Capacity Management at Thermal Power Plants in India, International Conference on Technology  Management, American University, Dubai (18 - 20 March, 2014).
  26. A Project Selection Approach in Six-Sigma Analysis, International Conference on Advances in Manufacturing and Materials Engineering (AMME-2014), NIT Suratkal, Karnataka (27-29 March- 2014).
  27. Analysis of Powder Metallurgy Process Parameters for Relative Density of Low Carbon Alloy Steel using Design of Experiments Tool, International Mechanical Engineering Congress, NIT  Tiruchirappalli (June 13-15, 2014).
  28. Cost of Poor Quality Reduction in Automobile Sector: An Exploration with Six-Sigma, International Conference on “Recent Advances in Manufcturing, SVNIT Surat. (June 26-28-2014)
  29. Performance Evaluation and Analysis of a Beer Plant: A Case study, National Conference on Advancement and Futuristic Trends in Mechanical Engineering, PEC, Chandigarh. (October 17-18, 2014)
  30. Do SMEs Need Business Incubation for Productive Capacity Levels?: A Case Study, International Conference on Advances in Civil, Structural and Mechanical Engineering, Institute of Research Engineers, Bangkok, (21-21 February, 2015).
  31. Site Selection for Solar Power Plant Using Fuzzy VIKOR Approach, Fifth National Conference on Recent Advances in Manufacturing, NIT Surat, (June 6-8, 2015).
  32. Study of Powder Metallurgy Process Parameters for Mechanical Properties of Sintered Fe-Cr-Mo Alloy Steel, National Conference on Advanced Materials'/Processing, MNIT Jaipur (Dec 2-4, 2015).
  33. Multiple Attribute Decision Making Approaches: A Critical Literature Survey with Fuzzy-TOPSIS Methodology, International Conference on Production and Industrial Engineering, NIT, Jalandhar (December 19 - 21, 2016).
  34. Issues & Barriers in Implementation of Hydro Energy, National Conference on Advances in Mechanical Engineering, NIT, Kurukshetra (June 2-3, 2017).
  35. Identification and Prioritization Lean Six Sigma Barriers in MSMEs, 2nd International Conference on New Frontiers in Engineering Science and Technology, National Institute of Technology, Kurukshetra, (February 18-22, 2019)
  36. Green Supply Chain Management : A Review, 6th International Conference on Production and Industrial Engineering (CPIE 2019), National Institute of Technology, Jalandhar, (June, 8-10, 2019).

Professional Recognition

  1. 'Highly Commended Paper Award' by The TQM Journal (Emerald) for paper, 'A Case Study: Application of Six Sigma Methodology in a Small and Medium Sized Manufacturing Enterprise' (2013).
  2. 'Outstanding Paper Award' for research paper presented at International Conference on Technology and Business Management, American University of Emirates, Dubai (24-26 March, 2014).
  3. 'Best Teacher' Award for the year 2019 by National Institute of Technology, Kurukshetra.
  4. Guest Editor for International Journal of Six Sigma and Competitive Advantage (October 2019 - Till Date). 
  5. Previously Member of Editorial Board of World Journal of Human Resources and World Journal of Organizational Dynamics (journals of World Research Organization).
  6. Member of BOS/DRC/Research Boards of several universities/NITs/Institutes.