Control Applications to Marine Robotic Vehicles, Industrial Automation, Process Control, Instrumentation, Model Predictive Control

Experience :
Working as an Assistant Professor in the Department of Electrical Engineering, NIT Kurukshetra since 16/05/2013
Worked as an Sr. Assistant Professor in Embedded Systems Division, School of Electronics, VIT University Vellore from 11/05/2009 to 13/05/2013

Research Publications:

Journals listed in TR-SCI

Prasad M P R, and Swarup A “Position and velocity control of remotely operated underwater vehicle using model predictive control”, Indian Journal of Geo Marine Sciences, vol no 44(12), Dec 2015 pp. 1920-1927 (SCI, NISCAIR publishers, also available online)
Prasad M P R, and Swarup A, “Sliding mode based predictive controller of a spheroidal underwater vehicle”, International Journal of Maritime Engineering, RINA transactions UK (Vol. 159, June 2017 issue, listed in SCI) DOI 10.3940/rina.ijme.2017.a2.418
Prasad M P R, and Swarup A, “Model Predictive Control of an AUV using Decoupled Approach “International Journal of Maritime Engineering, RINA transactions UK (Trans RINA, Vol 160, Part A1, Intl J Maritime Eng, Jan-Mar 2018) DOI 10.3940/rina.ijme.2018.a1.459
Prasad M P R, and Swarup A, “Control of Remotely Operated Underwater Vehicle using MPC” Published in IJME, RINA, 2019
Prasad M P R,” Set point trajectory control of ROV using MPC published in IJME, RINA, 2020

Scopus Indexed:

Kumaril Buts, Lillie Dewan, M.P.R. Prasad, “PI-based hybrid control for load-stress management of a fuel cell-based hybrid power system” International Journal of Modelling, Identification and Control, Dec 2022

Buts, K., Dewan, L. & Prasad, M. (2023). Development of renewable energy-based power system for the irrigation support: case studies. Energy Harvesting and Systems Journal. https://doi.org/10.1515/ehs-2022-0123

International/National Conferences

1. Yaswanth Sai M P R PRASAD. “High Speed Sixty Four Bit Vedic Multiplier”. 2021 5th Conference on Information and Communication Technology (CICT), IIITDM Kurnool (Fully Funded by Central Government). vol.5, no.2, PP.4,Dec 2021,, https://doi.org/10.1109/CICT53865.2020.9672441
2. 2. Nikhil Kumar & M P R Prasad. “A Comparative Analysis Of Different Topologies Of On-board Charger (OBC) With An Approach Of Interfacing It With MCB”. 2021 6th International Conference for Convergence in Technology (I2CT), IEEE Bombay Section. vol.6, no.2, PP.6,Apr 2021,, https://doi.org/10.1109/I2CT51068.2021.9417956
3. 3. Vindhyali Sood M P R Prasad. “Simulation of Counter Based DPWM for implementation on FPGA”. International Conference WOMEN RESEARCHERS IN ELECTRONICS AND COMPUTING, NIT Jalandhar. vol.5, no.1, PP.6,Apr 2021,, https://doi.org/10.21467/proceedings.114.60
4. 4. Pentakota Sai Kiran M P R Prasad. “Development of Deep Sea Unmanned Underwater Robots: A Survey”. IEEE INDICON 2020, NSUT New Delhi, NSUT Delhi. vol.5, no.17, PP.6,Dec 2020,, https://doi.org/10.1109/INDICON49873.2020.9342069
5. 5. Kumaril Buts Lille Dewan M P R Prasad. “Modeling and Implementation of Wind-Battery Storage Hybrid Power System in LabVIEW Environment”. 2020 First IEEE International Conference on Measurement, Instrumentation, Control and Automation (ICMICA), NIT Kurukshetra. vol.1, no.1, PP.6,June2020,, https://doi.org/10.1109/ICMICA48462.2020.9242826
6. 6. Daleep Kumar M P R Prasad Prakash Chand. “Development of Controller for Twin Rotor Multiple Input and Multiple Output System”. 2020 First IEEE International Conference on Measurement, Instrumentation, Control and Automation (ICMICA), NIT Kurukshetra. vol.1, no.1, PP.6,Jun 2020,, 1109/ICMICA48462.2020.9242889
7. 7. Pentakota Sai Kiran M P R Prasad. “Depth Control of AUV Using State-Feedback and Full Order Observer”. IEEE Sympol 2019 CUSAT Kerala, CUSAT Kerala State Govt. University. vol.4, no.2, PP.6,Dec 2019,, https://doi.org/10.1109/SYMPOL48207.2019.9005296
8. 8. Daisy Ranawat M P R Prasad Geeta Srinivasan. “An efficient approach for WCET measurement of Runnables and Tasks of the Application software”. IEEE 1st International Conference on Energy, Systems and Information Processing, IIITDM Kancheepuram, Tamil Nadu, July 2019., IIITDM Kancheepuram, Tamil Nadu. vol.1, no.1, PP.6,Jul 2019,, https://doi.org/10.1109/ICESIP46348.2019.8938278
9. 9. Preeti Singh M P R Prasad. “Stability Control of High Speed Train using Robust PID Controller”. ICECA 2019, IEEE, Coimbatore, Tamil Nadu, India, RVS Technical Campus, Coimbatore, India. vol.4, no.1, PP.6,June-2019,, https://doi.org/10.1109/ICECA.2019.8822105
10. 10. Harsh Deep Ahlawat, Modi Pandu Ranga Prasad, Rishi Pal Chauhan. “Antenna Azimuthal Position Control Using Model Predictive Control”. 2019 IEEE International Conference on Electrical, Computer and Communication Technologies (ICECCT), Coimbatore, India. vol.4, no.1, PP.6,Feb 2019,, 1109/ICECCT.2019.8869043
11. 11. A M AMINUR R B B HEMAKUMAR M P R PRASAD. “Robotic Fish Locomotion & propulsion in Marine Environment”. 2nd IEEE ICEPE-2018, 1-2 June 2018 NIT Meghalaya, NIT Meghalaya. vol.1, no.1, PP.6,Jun 2018,, https://doi.org/10.1109/EPETSG.2018.8658797
12. 12. Daisy Ranawat M P R Prasad. “A Review on Electric Vehicles with perspective of Battery Management System”. IEEE-ICEECCOT, 14-15 Dec 2018, Mysore, GSSS INSTITUTE OF ENGINEERING & TECHNOLOGY for WOMEN. vol.1, no.1, PP.6,Dec 2018,, https://doi.org/10.1109/ICEECCOT43722.2018.9001321
13. 13. B H Kumar A M Aminur R B M P R Prasad. “Performance Improvement in Hot Strip Rolling Mills by Improving Looper System”. IEEE-ICOEI 2018, 11-12, May 2018 SCAD College, Tirunelveli, SCAD College, Tirunelveli Tamil Nadu. vol.1, no.1, PP.6,May 2018,, https://doi.org/10.1109/ICOEI.2018.8553709
14. 14. ROBIN M P R PRASAD. “Current and speed control of a permanent magnet synchronous motor using PID and LQR”. IEEE-ICCCNT 3-5 July 2017, IIT Delhi, IIT Delhi. vol.1, no.1, PP.6,Jul 2017,, https://doi.org/10.1109/ICCCNT.2017.8204151
15. 15. Anshul Khinchi M P R Prasad. “Control of Electric Power Assisted Steering System using Model Predictive Control”. International Conference on Advances in Dynamics, Vibration and Control (ICADVC-2016), Feb. 25-27, 2016 NIT Durgapur, NIT Durgapur. vol.1, no.1, PP.6,Feb 2016,,
16. 16. M P R Prasad A Swarup. “Modeling and control of an underwater robot propulsion system using model predictive control”. IEEE USYS-16 13-14 Dec 2016 Malaysia, Penang Malaysia., School of Electrical and Electronic Engineering, Engineering Campus, Universiti Sains Malaysia, Pulau Pinang, MALAYSIA. vol.5, no.1, PP.6,Dec 2016,, https://doi.org/10.1109/USYS.2016.7893911
17. 17. M P R Prasad A Swarup. “Depth Control of a high speed underwater vehicle using model predictive control”. IEEE UPCON 2016 09-11 Dec 2016, IIT BHU Varanasi, IIT BHU Varanasi. vol.5, no.1, PP.6,Dec 2016,, https://doi.org/10.1109/UPCON.2016.7894655
18. 18. M P R Prasad A Swarup. “On control of jet angle and heading stabilization of a spheroidal underwater vehicle”. IEEE UT-2015 23-25 Feb 2015 NIOT Chennai, NIOT Chennai (Govt. Organization). vol.5, no.1, PP.6,Feb 2015,, https://doi.org/10.1109/UT.2015.7108214
19. M P R Prasad. “Autonomous Underwater Vehicle Control”. International Conference on Innovations in Power and Advanced Computing Technologies (i-PACT-2019). IEEE Conference Record Number- 4490, VIT University Vellore. vol.2, no.1, PP.6,Mar 2019
20. Ankit Srivastava Awanish Kumar Tripathi M P R Prasad. “Comparative Analysis on Depth Control of an Underwater Vehicle”. International Conference on Innovations in Power and Advanced Computing Technologies (i-PACT-2019). IEEE Conference Record Number- 4490, VIT University Vellore. vol.2, no.1, PP.6,Mar 2019
21. Prasad M P R, and Swarup A, “Model Predictive Control of an underwater vehicle for Ocean engineering applications”, National Symposium on Recent Advances in Remote Sensing and GIS with special Emphasis on Mountain Eco systems, ISRS 2016, at IIRS, an ISRO Unit, Dehradun during 7-9 Dec 2016.

M.Tech Dissertations Guided:

B Tech Projects Guided

STC/FDP/Workshops Organized:

Title of the Program From To Duration Sponsoring Agency /Self-financed
1. Coordinator in Advanced Embedded Control Systems & Applications (AECSA-2020)| 21-Sep-2020 26-Sep-2020 6 days TEQIP-III NIT KURUKSHETRA
2. Coordinator in Advanced Control Paradigms and Evolving Trends (ACPET-2020) 26-Oct-2020 31-Oct-2020 6 days TEQIP-III NIT KURUKSHETRA
3. Coordinator in Advances in Modelling and Control of Robotics (AMCR-2021) 18-Oct-2021 23-Oct-2021 6 days Institute Sponsored fund, NIT Kurukshetra
4. Coordinator in Advanced Control Systems & Experiments (ACSE-2022) 18-Jul-2022 23-Jul-2022 6 days Institute Sponsored fund, NIT Kurukshetra under Institute Diamond Jubilee Celebrations
5. Coordinator in Advances in Process Control & Instrumentation (APCI-2019) 15-Jul-2019 19-Jul-2019 5 days Self-financed

6. Local Coordinator in System Designing with Controllers from 14/11/2022 to 18/11/2022 5 days NITTTR Chandigarh

7. Local Coordinator in Tools for Engineering Research from 19/09/2022 to 22/09/2022 5 days NITTTR Chandigarh

8. Local Coordinator in Big Data Applications in Electrical Engineering from 20/02/2023 to 24/02/2023, 5 days NITTTR Chandigarh

9. Session Chair in National Conference on Internet of Things & Embedded Systems organized by ECE Department, NIT Kurukshetra during Feb 24-25, 2023.

10. Coordinator in STC on “Effective Communication Skills and Leadership Qualities” organized by Training and Placement Cell, NIT Kurukshetra during June 26-30, 2023 under Institute Diamond Jubilee Celebrations.

11. Coordinator in STC on “Cyber Physical Systems and Industrial Automation” organized by the Department of Electrical Engineering NIT Kurukshetra during 17-22 July 2023.

12. Coordinator in one day webinar on “Unlocking the Future: Mechatronics Technological Innovation” on 07/11/2023 organized by NITTTR Chandigarh

Institute Responsibilities:

Faculty In-Charge: Training and Placement Cell w. e. f July 2022

Hostel Warden: H-8 w. e. f July 2021

Worked as a Liaison Officer, OBC Cell during July 2019 to June 2022.

Facilitator, Heartfulness Meditation under Thought Lab w e f July 2022

Departmental Responsibilities:

Member in DRC w e f 2022

Member in BOS w e f 2021

Member in DAC during Feb 2019 to Feb 2021

Prof I/c: MPMC Lab

Prof I/c CAD Lab during 2018-2019

Prof I/c Control Systems Lab during 2017-2019

Department Time Table Coordinator during 2018-19

Subjects Taught for M.Tech students

1. Guidance and Control
2. Computer Based Control Systems
3. Robust Control and Applications
4. Optimal and Robust Control
5. Mechatronics
6. Instrumentation and Control for Energy System

7. Optimal Control and Applications

8. Multivariable Control Systems

Subjects taught for B.Tech students

1. Circuit Theory
2. Network Analysis and Synthesis
3. Measurements & Instrumentation-I
4. Measurements & Instrumentation-II
5. Digital Electronics
6. Signals and Systems
7. Control Systems
8. Power Plant Instrumentation
9. Mechatronics
10. Network Synthesis and Filters

11. Industrial Control

Book Chapters:

1. Latency and Power Improvement of Hardware Sequences using Collapse and Evolve approach: Nature-Inspired Methodology
Authors: Ratnala Vinay & M.P. R. Prasad 2022 Springer
2. Multiwave Effect Estimate of Pandemic on Population: A Prediction model and IoT based Altering
Authors: Ratanla Vinay M P R Prasad T S V S Vijaya Kumar 2022 Springer
3. Design of Naval Hamming Encoding and Decoding Circuits with Double Error Detection

Authors: Thanneru Chandrasekhar, M P R Prasad, Venkata Harish Babu Bhavanigari 2022 Springer
4. Single-Object Detection Hardware Acceleration using XfOpenCV library
Authors: Aman Saxena, M.P. R. Prasad,Prashant SivajiSutar 2021 Springer
5. Development of Controller for Robotic Fish

Authors: M P R PRASAD and A M AMINURR B 2018 Springer Nature

Expert Lectures: