registrar@nitkkr.ac.in +01744-233208
logo
National Institute of Technology Kurukshetra
(Institution of National Importance)
राष्ट्रीय प्रौद्योगिकी संस्थान कुरुक्षेत्र
राष्ट्रीय महत्व का संस्थान
National Institute of Technology
Kurukshetra-136119, Haryana

 Meenu

Designation:    Professor
Department:    Mechanical Engg
Qualification:    Ph.D. Sept 2004, Kurukshetra University
Address:    

CT-201 N.I.T. Campus


Email:    meenu_mk1@nitkkr.ac.in
Phone No:    Extn.-466 | 9416366065
Area of Interest:    

Machine Vision(image processing, Image Analysis, Pattern Recognition), Artificial Neural Network, Genetic Algorithm, Taguchi Technique, Response Surface Methodology, Soft Computing Technique. (My future plans is the research in the area of  advanced optimization techniques)

Experience :

Total experience (in years):
Teaching – 34  years

Others:   

Experience :

Total experience (in years):

  • Teaching – 34  years

 

Other :

 Research Publications  – 

PUBLICATIONS

2008-2009

  1. Sanjeev kumar, P.C.Tewari, Sunand Kumar,Meenu,”Availability Optimization for Urea Synthesis System of  Fertilizer plant using Genetic Algorithm Technique”, Published in International Journal of Engineering Science and Technology(EJEST) Volume 2.,  No. 3, March 2009, pp70-83, ISSN: 0974-2050.

  2. Sanjeev kumar, P.C.Tewari, Sunand Kumar,Meenu,”Performance  Evaluation and Optimization for Urea Crystallization System in a fertilizer plant using Genetic Algorithm Technique”, Published in International Journal of  Applied Engineering & Research(IJAER), Volume 4., No. 6, June 2009,pp1093-1105, ISSN: 0973-4562.

 

2009-2010

 

  1. Sanjeev kumar, P.C.Tewari, unand Kumar, Meenu,”Performance  Eval;uation and Optimization for Urea Prilling System of Fertilizer plant using Genetic Algorithm Technique”, Published in International Journal of  Mechanical and Automobile Engineering(IJMAE), Volume 3., No. 4, Dec 2009, pp68-80, ISSN: 0974-231X.

  2. Sanjeev kumar, P.C.Tewari, SunandKumar,Meenu,” Availability Optimization of CO-Shift Conversion System of  Fertilizer plant using Genetic Algorithm Technique”, Bangladesh Journal of Scientific and Industrial research(BJSIR), 45(2),133-140, before june 2010

  3.  Deepika Garg, Kuldeep Kumar , Meenu,” Availablity Optimization for Screw plant based on Genetic Algorithm”, International Journal of Engineering Science and Technology, vol. 2(4),April 2010, pp658-668, ISSN:0975-5462.

 

2010-2011

 

  1. Surinder Kumar,Meenu, P.S. Satsangiand H.K. Sardana “Optimization of machining parameters in turning UD-GFRP composites using Taguchi’s design of experiments approach”, International Journal of Materials Science and Engineering, Vol. 2, No. 1-2, 2011, pp. 19-28.International Science Press, ISSN: 0976-6243

  1.  Surinder Kumar,Meenu, P.S. Satsangiand H.K. Sardana“Modeling and Analysis for surface roughness and material removal rate in machining of UD-GFRP using polycrystalline diamond (PCD) tool”, International Journal of                    Engineering, Sciences and Technology, Vol. 3, No. 8, 2011, pp. 248-270.

2011-2012

  1. Surinder Kumar,Meenu, P.S. Satsangiand H.K. Sardana“Optimization of surface roughness in turning unidirectional glass fiber reinforced plastics(UD-GFRP) composites using polycrystalline diamond (PCD) cutting tool”, Indian         Journal of Engineering & Materials Sciences, Vol. 19, Issue 3, 2012, pp. 163-174.
  2. Surinder Kumar,Meenu, P.S. Satsangiand H.K. Sardana “Multiple regression model for cutting force in turning UD-GFRP using polycrystalline diamond cutting tool”, International Journal of Advanced Engineering Technology, Vol. 3, Issue 1, 2012, pp. 108-115.
  3. Surinder Kumar,Meenu and P.S. Satsangi“Experimental investigation and optimization in turning of UD-GFRP composite material by regression analysis using (PCD) tool”, International Journal of Advanced Engineering Technology Vol. 3, Issue 3, 2012, pp. 32-38.
  4. Surinder Kumar, Meenu, P.S. Satsangi, Sushil Kumarand H.K. Sardana “Experimental Evaluation of Surface Roughness for Turning of UD-GFRP Composites Material using Regression Modeling”, International Journal of Engineering & Technology Education, Vol. 6, No. 1, 2012, pp. 35-43.
  5.  Surinder Kumar, Meenu, P.S. Satsangiand H.K. Sardana “Cutting forces optimization in the turning of UD-GFRP composites under different cutting environment with polycrystalline diamond tool”, International Journal of Engineering, Science and Technology, Vol. 4, No. 2, 2012, pp. 106-121.
  6. Surinder Kumar, Meenu and P.S. Satsangi, “A genetic algorithmic approach for optimization of surface roughness prediction model in turning using UD-GFRP composite”, Indian Journal of Engineering & Material Sciences, Vol. 19, Issue 6, 2012, pp. 386-396.

2012-2013

 

  1.        14 Meenu and Surinder Kumar “Prediction of cutting force in turning of UD-GFRP using mathematical  model and simulated annealing”, International Journal of Frontier of Mechanical Engineering, 7(4)  Sept 2012, pp. 417-426.
  2.       15. Surinder Kumar, Meenu, P.S. Satsangiand H.K. Sardana “Predictive modeling of surface roughness and material removal rate in turning of UD-GFRP composites using carbide (K10) tool”, International Journal of Advanced Design                  and Manufacturing Technology, ISSN: 2008-1421  Vol 6 Issue 2, June 2013 pp 37-49
  3.      16 Surinder Kumar,Meenu and P.S. Satsangi “Multiple Performance Optimization in Machining of UD-GFRP Composites by a PCD Tool using Distance – Based Pareto Genetic Algorithm (DPGA)”, International Journal of MECHANICA                  CONFAB , Vol 2, No. 2,  pp 49–62 Feburary-March 2013

 

  1.      17. Surinder Kumar,Meenu and P.S. Satsangi“Optimization of surface roughness in turning unidirectional glass fiber reinforced plastics (UD-GFRP) composite using Carbide (K10) cutting tool”, International Journal of Academic Research             Journal of Multidisciplinary, Volume 1 Issue 9, May 2013, pp 105-128

  2. Surinder Kumar,Meenu and P.S. Satsangi “Prediction of cutting forces in machining of unidirectional glass fiber reinforced plastic composites ”, International Journal ofFrontier of Mechanical Engineering, vol 8, issue 2 June 2013 pp 187-200

  1. Surinder Kumar,Meenu and P.S. Satsangi “Multiple-response optimization of turning machining using UD-GFRP composite using carbide (K10) cutting tool through Taguchi method and Utility concept”,International  Journal of Mechanical Science and Technology, 27(9) 2013, pp 2829-2837

  2. Surinder Kumar,Meenu and P.S. Satsangi “Multi-objective optimization of cutting parameters for cutting forces in turning using polycrystalline diamond cutting tool”, International Journal of MECHANICA CONFAB , Vol 2, No 3, April-May 2013, 17-33,

  3. Meenu and Surinder Kumar“Multi-characteristic optimization of turning process parameters using Utility-based Taguchi method”, International Journal of Asian Academic Research Journal of Multidisciplinary,  Volume 1 Issue 9, May 2013,pp 129-149

  4. Meenu and Surinder Kumar “Multi-objective optimization of cutting forces in turning of UD-GFRP Composite using Taguchi grey relational analysis”,International Journal of mechanical engineering, 2013 ,pp 166-177.

  5. Anuj Kumar Sehgal, Meenu,” Optimized Prediction and Modeling Under End Milling Machining By ANOVA And Artificial Neural Network” , International Journal of Engineering Research & Technology (IJERT) ISSN: 2278-0181,Vol. 2 Issue 3, March – 2013, pp1-9

  6. Anuj Kumar Sehgal, Meenu ,”Application of Artificial Neural Network and Response Surface Methodology for Achieving Desired Surface Roughness in End Milling Process of Ductile Iron Grade 80-55-06  “, IJCEM International Journal of Computational Engineering & Management, Vol. 16, Issu e 3, May 2013, pp 4-14

  7. Meenu and Surinder Kumar“Prediction of surface roughness in turning of UD-GFRP using mathematical model and simulated annealing”, International Journal of Advanced Engineering Technology, E-ISSN 0976-3945  IJAET/Vol. IV/ Issue II/April-June, 2013/81-85

  8. Meenu and Surinder Kumar ,” Prediction of surface roughness in turning of Ud-GFRP  using artifical neural network” , International Journal of Mechanica Confab ISSN: 2320-2491 Vol. 2, No. 3, April-May 2013 PP 46-56.

  9. Ram Singar Yadav, Meenu ,”Jobs scheduling using genetic algorithm, International Journal of   Mechanica Confab ISSN: 2320-2491 Vol. 2, No. 3, April-May 2013 34-45

  10. Meenu and Surinder Kumar ,” Multi objective optimization of cutting parameters in turning using  grey relational analysis”, International Journal of Industrial Engineering Computations” 4(2013)547-558

 

2013-2014

 

  1. Meenu and Surinder Kumar,” Optimization of the Material Removal Rate in Turning of UD-GFRP using the Particle Swarm Optimization Technique” ,International Journal of Automotive and Mechanical Engineering Vol 8, July-Dec 2013 pp 1226-1241

  2. Meenu, Anuj Kumar Sehgal., “Surface Roughness Optimization by Response Surface Methodology and Particle Swarm Optimization”, International Journal of Engineering Science and Technology”, Vol.5 Issue 7, July 2013.

  3. A.K Sehgal, Meenu, “Application of Artificial Neural Network in Surface Roughness Prediction considering Mean Square Error as Performance Measure”, International Journal of Engineering and Technical Research ISSN: 2321-0869, Special Issue, May 2014. 72-76

  4. Dipesh, Meenu,”Machining process parameters of USM :A review” International Journal of Engineering Research in Management and Technology ISSN 2278-9359 vol 2 , Issue 10, Oct 2013

2014-2015

 

  1. Nirmal Singh, Meenu,”Design optimization of Spur gear for its center distance using genetic algorithm”, international research journal of Science and technology, vol 1, issue 2, Jan 2015, ISSN 2394-5680 pp 19-28

  2.  Surinder kumar, Meenu Gupta, P.S.Satsanghi,”Multi response optimization of cutting forces in turning of UD-GFRP composite using distance-based pareto genetic algorithm approach “International Journal of Engineering Science and Technology  18(2015), 680-695.

  3. Meenu gupta, Surinder Kumar,” Investigation of surface roughness and MRR for turning of UD-GFRP using PCA and Taguchi method”, International Journal of Engineering and Science,18(2015), 70-81

  4. Tushar Jain and Meenu,”Mahine Vision System with Industrial Automation and Applications: The Mechanical Prespective” NIET Journal of Engineering & Technology [ISSN:2229-5828] Vol 1, Number 1(2015) pp.17-21

2016-2017

  1.     D. Popli and M. Gupta, “Sequential procedure for selecting the ranges of process parameters     in rotary ultrasonic machining,”International Journal of Manufacturing Research, vol. 12, no. 3, pp. 364–378, Jan 2017.

  2. Pradeep Jain and Meenu,” Real Time Object Recognition System”, International Journal of Theoretical and Applied Mechanics,Volume 12, Number 2 (2017) pp. 241-266,2017, ISSN 0973-6085

  3. Pradeep Jain and Meenu,Automatic contrast enhancement using fuzzy logic for real time object recognition system”,International Journal of Scientific & Engineering Research,Volume 8, Issue 3, March-2017  pp. 762-765 ,ISSN 2229-5518

  4. Surinder Kumar,Meenu,P.S.Satsangi,”Optimization of material turning operation -a literature review”, International Journal of Scientific Research in Science, Engineering and Technology (IJSRET) ,Vol 2, Issue 6, ,pp 381-390,Nov-Dec 2016

  5.  Surinder Kumar,Meenu,P.S.Satsangi “ Investigation of surface roughness and MRR for UD-GFRP composites using Taguchi grey relation analysis”, International Journal of Automotive and Mechanical Enggineering , Vol 14, Issue 2,June 2017 , 4298-4314

  6. S Verma, Meenu, J P Misra, “Study on temperature distribution during Friction Stir Welding of 6082 aluminum alloy” Materials Today: Proceedings 4 (2017) 1350–1356

 

2017-2018

  1. Tushar Jain, Dr. Meenu and Dr. H K Sardana “Mechanical CAD Parts Recognition for Industrial Automation”. Springer SIST Smart Innovation, Systems and Technologies, Vol. 78, (SCOPUS, EI-COMPENDEX AND SPRINGERLINK) International Journal of  Smart Computing and Informatics, 978-981-10-5546-1, 431837_1_En, (37).  November 2017 pp. 341-349. Paper Download Link, http://www.springer.com/series/8767 NOT WITH ME

  2. D. Popli and M. Gupta, “Experimental study and optimization of cutting parameters in machining of super alloy with hybrid ultrasonic method,” Advances in Manufacturing, no. 5, pp. 1–36, August 2017.

  3. Tushar Jain, Dr. Meenu and Dr. H K Sardana “Machine Vision System for Industrial Parts Recognition”. International Journal of Engineering and Manufacturing Sciences ISBN 2249-3115 (UGC Approved) (Journal No.-63291). ISSN 2249-3115 Vol. 7, No. 1 (2017) pp. 51-57.

  4. Anuj Kumar Sehgal , Meenu,” Grey relational analysis coupled with principal component analysis to optimize the machining process of ductile iron”, Materials Today: Proceedings,5(2018) 1518-1529.

  5. D. Popli and M. Gupta,” Investigation of machining rate and roughness for rotary ultrasonic drilling of Inconel 718 alloy with slotted diamond metal bonded tool”, International Journal of Manufacturing Research, 2017. 13(1), pp. 68–95

  6.  D. Popli and M. Gupta, A Chipping reduction approach in Rotary Ultrasonic Machining of Advance Ceramic” in ScienceDirect ICMPC 2017, Materials Today: Proceedings , 5 (2018) 6329–6338 (to check whether with me)

  7. D.Popli,Meenu ,”Investigation of the circularity and conicity of super alloy during rotary ultrasonic machining” Iranian Journal of science and technology  , June 2018

  8. Pawan Kumar, Meenu and Vineet Kumar, Optimization of process parameters for WEDM of Inconel 825 using grey relational analysis “,DSL Decision Science Letters Growing Science, 7 (2018) 405–416(Scoups)

 

  1. Arvind, Meenu Gupta, ”Optimum design for a composite hollow helical Spring By Particle Swarm Optimization”, International Journal of  Engineering Technology Science and Research, ISSN 2394-3386 vol 4, Issue 7, July 2017

  2. D.Popli and M. Gupta, “Experimental Investigation of Tool Wear and Machining Rate in Rotary Ultrasonic Machining of Nickel Alloy,” International Journal of Machining. Science and Technology, Sept  2017,vol21

 

2018-2019

  1. Shubham Verma, Meenu Gupta, Joy Prakash Misra,” Performance evaluation of friction stir welding using  machine learning approaches” Method X (Elsevier),5(2018) 1048-1058

  2. Pradeep Jain and Meenu,”Object Recognition using Neural Networks ”,International Journal of Applied Engineering Research, Vol 13, No. 6 ,pp 139-143,  2018 (Scopus)

  3. Tushar Jain, Dr. Meenu and Dr. H K Sardana “Unmanned Machine Vision System for Automated Recognition of Mechanical Parts”. International Journal of Intelligent Unmanned Systems     (IJIUS) (ESCI JOURNAL, SCOPUS). Emerald Publishing UK. Vol. 6 (4), pp.184-196, 2018.

  4. Tushar Jain, Meenu, and H.K.Sardana,” Design of machine vision system for automated inspection in robotics”, International Journal of Applied Engineering Research, Vol 13 No.6, 2018 pp 30-34 (Scopus)

  5. Tushar Jain, Dr. Meenu and Dr. H K Sardana “Automated Recognition of Mechanical Parts with Machine Vision System”. Journal of Experimental and Applied Mechanics pp. 1-6, Vol. 9, No. 3 2018.

  6. Shubham Verma,Meenu, J.P.Mishra ,” Optimization of process parameters in friction stir welding of armormarine grade aluminium alloy using desirability approach” Material research express ,  SCI vol 6 No 2 (Nov 2018) 0265505

  7.  Tushar Jain, Dr. Meenu and Dr. H K Sardana “Quality Edge Extraction of Mechanical CAD Objects for Intelligent Manufacturing”.  International Journal of Process Management and Benchmarking (IJPMB) (SCOPUS (ELSEVIER) Inderscience Publishers UK.  Finally available on line in the 2019 Vol.9 No.4

  8. Shubham Verma,  Meenu Gupta, Joy Parkash Misra ,”Study of thermal cycle, mechanical and Metallurgical properties of friction stir welded aviation grade aluminium alloy” Institution of Mechanical Engineers , Journal Aerospace Engineering  published online on Dec 4 2018  Issue published: September 1, 2019 Volume: 233 issue: 11, page(s): 4202-4213

  9. Shubham Verma,  Meenu Gupta, Joy Parkash Misra,”Effect of pin profiles on thermal cycle, mechanical and metallurgical properties of friction stir welded aviation grade aluminium alloy”, Journal of Engineering Manufacture  Article, published online: February 22, 2019; Issue published: September 1, 2019 , Volume: 233 issue: 11, page(s): 2183-2195

  10. Surinder Kumar & Meenu  “Optimization of the surface roughness and material removal rate in turning  of unidirectional glass fiber reinforced plastics using the fuzzy-grey relational technique , Indian Journal of Engineering & Materials Sciences Vol. 26, February 2019, pp. 7-19 (to be printed)

  11. Shubham Verma, Meenu Gupta, and Joy Prakash Misra, ”Effect of Preheating and Water Cooling on the Performance of Friction-Stir-Welded Aviation-Grade Aluminium Alloy Joints”, Journal of Materials Engineering and Performance Vol 26 No.1 3 July 2019

  12. Pawan Kumar, Meenu Gupta and Vineet Kumar ,” Surface integrity analysis of WEDMed specimen of Inconel 825 superalloy “International Journal of Data and Network Science 2 (2018) 79–88 (26 July) Non Scoups

  13. Tushar Jain, Dr. Meenu and Dr. H K Sardana “Robust Active Vision Industrial CAD Parts Recognition System”. International Journal of Intelligent Machines and Robotics (IJIMR).Inderscience Publishers UK . Vol 1 No 1, pp 16-33, 2018

  14. Tushar Jain, Dr. Meenu and Dr. H K Sardana “Design of Computer Vision System for Objects Recognition in Automation Industries” .Global Journal of Enterprise Information System (GJEIS). Vol 10, No.1, pp 86-90, 2018 UGC Approvedhttp://www.informaticsjournals.com/index.php/gjeis/pages/view/ai  (not with me) afterJuly

 

2019-2020

  1. Tushar Jain, Dr. Meenu and Dr. H K Sardana “Quality Edge Extraction of Mechanical CAD Objects for Intelligent Manufacturing”.  International Journal of Process Management and Benchmarking (IJPMB) (SCOPUS INDEXED) Inderscience Publishers UK.   Vol 10. No1 , pp 22-47 , 2020

International/National Conferences

  1. Meenu, Kirpal Singh, S.K.Aggarwal, ”Effect of current on fatigue strength of welded joints”, Modelling Measurement and Control, B, ASME press, France vol.52, No 2, 1994, pp 9-20.

 

  1. Meenu, Kirpal Singh, S.K.Aggarwal ,”Effect of various parameters on fatigue strength of welded joints”, Modelling Measurement and Control, B, ASME press, Francevol.52, No 2,1994, pp21-32

 

2003-2004

 

  1. Meenu, N.P.Mehta, H.K. Sardana , “Machine vision  Inspection: Application to Mechanical Inustry”, X111 National Conference of Indian Society of Mechanical Engineers, IIT Roorkee Dec 30-31,2003, PE-130

 

2010-2011

 

  1. Deepika garg ,kuldeepkumar, meenu, “Radial basis neural network as a mapping device for availability    prediction”, in Proceedings of International Conference on emerging trends in Engineering and Technology, Geeta Institute of Management And Technology Kanipla, Kurukshetra  held on 14-16 Oct 2010.

  2. Tushar Jain ,Meenu , “The Strengths and Dilemmas of Organizational Integration through Computerization”, National Conference on Manufacturing Excellence MANFEX -2011,held at Amity Noida ,3rd-4th March,2011.

 

  1. A.K. Sehgal,  Meenu, “Optimization and Analysis of welding operation parameters for achieving the highest weld strength by using Taguchi Design of Experiment”, in the proceedings of National Conference on Emerging Vistas of Mechanical Engineering in 21st century EVME -2011 held on 4th to 5th April  pp-358-364.

 

2011-2012

 

  1. Surinder Kumar, Meenu, P.S.Satsangi, H.K.Sardana, “ Surface Roughness Analysis in Machining of UD-GFRP Composites by Polycrystalline Diamond (PCD) tool”, in Proceedings of International Conference on Advances in Materials and Manufacturing Technology ,Chitkara University held on July 20-21,2011,pp 13-19.

  2. Anuj Kumar Shegal, Meenu, Balraj Gupta, Rajeev Upadhyay“ Modelling of surface roughness for end milling of rolled Aluminium by ANOVA and Artificial neural network”,in the proceedings of International conference of agile manufacturing held on 18th  to 20th Dec 2011, 88-94.

  3. Tushar Jain, Meenu ,” Computer Vision: An enterprise of Industrial , Automatic Integration”, International Conference on Advances in Modelling , Optimization and Computing(AMOC-2011) , held at IIT, Roorkee 05-07th December 2011.

  4. Surinder Kumar, Meenu, P.S. Satsangiand H.K. Sardana “Optimization of machining parameters in turning UD-GFRP composites using Taguchi’s design of experiments approach”, International Conference on Advancements & Futuristic Trends in Mechanical & Materials Engineering, Conference, PTU Jalandhar, Punjab, 2011, pp. 139.153

  5. Surinder Kumar, Meenu, P.S. Satsangi, Sushil Kumarand H.K. Sardana “Experimental Evaluation of Surface Roughness for Turning of UD-GFRP Composites Material using Regression Modeling”, Advances in Manufacturing Technology, Conference, NITTR Chandigarh, March-2012, pp.70-78       in Journal

  6. Tushar Jain, Dr. Meenu, Dr. H.K. Sadhana “Statistical Pattern Recognition and Neural Networks: A Comparative Study”, National Conference on Emerging Technologies in VLSI (NCETVLSI-2011) at MIET, Meerut 18th  September 2011.

  7. Tushar Jain, Meenu ,”Impact of  Machine Vision Technology in Industrial Automation”, International Conference on Manufacturing excellence MANFES 2012 held on 29-30 March at Amethi , 301-307

  8. Tushar Jain, Meenu, ” Computer Vision and Image Processing: A New Tool for Industrial Automation” National Conference on Computer Engg. & Information Tech. at NITTTR, Chandigarh “22-23rd  March 2012. and Technology

 

2012-2013

  1. Simran, Meenugupta,” Optimization of composite leaf spring for weight using Particle Swam Optimization”, in the National Conference on Technological development in Mechanical Engineering (TDME-2013) Shri Ram Murti Smarak College of Engineering Barelly on 20 th April 2013

 

2013-2014

 

  1. AnugPhyoeMinn, Meenu, ”Simulated annealing technique to optimize the flywheel energy storage materials”, National Conference on Recent trends in Chemical Sciences, Engineering and Technology (RTCET-2014) held at N.I.T Hamirpur on  29-30 May 2014

  2. Arvind Kumar, Meenu, “ Optimization of Helical Extension Spring for static load”, International Conference on Innovation in Design, Manufacturing and  Concurrent Engineering “(IDMC 2014) at NIT, Rourkela on 2-3 March

  3. A.K Sehgal, Meenu, “Application of Artificial Neural Network in Surface Roughness Prediction considering Mean Square Error as Performance Measure, National Conference on “Synergetic Trends in Engineering and Technology : Impact on Industry and Society (STET-2014), 25-26 April 2014, Eshan College of Engineering ,Mathura.

 

2014-2015

 

  1. Surinder Kumar, Meenu, P.S. Satsangi,”Multi objective distance based Pareto genetic Algorithm for optimization of machining parameters in turning process using Carbide (K10) tool pp 292-297. Proceedings of National Conference on Advancements and Futuristics trends in Mechanical Engineering AFTME-2014 ON 17-18  on October, 2014., PEC University of Technology

  2. Nirmal Singh, Ms. Meenu, “Design Optimization of Spur Gear for Its Centre Distance Using Particle Swarm Optimization Technique”, Proceedings of 5th National conference on recent advances in manufacturing 15-17 May 2015 , Sardar Vallabhbhai national Institute of Technology Surat

  3. Rohit Kanaujia, Meenu ,”Design optimization of screw jack for its weight using Genetic algorithm technique” National Conference on Nano Science and Instrumentation technology(NCNIT) June 6-7 , 2015, NIT Kurukshetra

  4. S Verma, Meenu, J P Misra,”Study on temperature distribution during Friction Stir Welding of 6082 aluminum alloy”, 5th International Conference on material processing and charsacterization held at MANIT  Bhopal on 12-13 March 2016

  5. KinshukKhandekar, Meenu“ Design Optimization of wet clutch using Genetic Algorithm National Conference on “Statistics and Analytical methods in Production AND Industrial Engineering(SAMPLE -2016) ON March 11-12 2016 at PEC , University of Technology

  6. Kinshuk Khandekar, Meenu,”Design Optimization of wet clutch using Particle Swarm Optimization “,4th National Conference on  NanoScience and Instrumentation Technology(NCNIT-2016)held  at NIT Kurukshetra,on4-5 June 2016

  7. Pradeep Kumar, Meenu, “Review of object recognition techniques” ,Proceedings of the National conference  on Innovative concepts in Mechanical Engineering ICME ,held at Ajay Kumar Garg Engineering College Ghaziabad on 29-30  April 2016

  8. S Verma, Meenu, J P Misra,”Experimental investigation of FSW of AA6082”IVth International conference on production and industrial engineering, CPIE-2016 held at JALANDHAR  10-12 Dec 2016

 

2016-2017

 

  1. Anuj Kumar Sehgal and Meenu, “Grey relational analysis coupled with principal component analysis to optimize the machining process of ductile iron”, International Conference on Processing of Materials, Minerals and Energy, 29-30 July 2016, PACE Institute of Technology and Sciences, Ongole, Prakasam, Andhrapradesh, India

  2. Arvind, MeenuGupta,”Design optimization of Composite Springs:A review’, National Conference on Recent Advances in Mechanical Engineering held at NIT, Kurukshetra on June 2-3 2017 vol 2,pp 123-127.

  3. Tushar Jain, Dr. Meenu and Dr. H K Sardana “Mechanical CAD Parts Recognition For Industrial Automation”. ANITS Springer SIST International Conference 3-4 th March 2017. Finally Accepted  (not with me)

2017-2018

 

  1. Pradeep Jain and Meenu,” Vision System for sheet inspection”, National Conference on Unconventional Manufacturing Technology ,on22nd and 23rd September 2017 held at Ajay Kumar Garg Engineering College Ghaziabad

  2. Tushar Jain,  Meenu and H K Sardana,”Automated recognition of Mechanical parts with machine vision system”, International Conference on advances in business and Engineering Sustainability(ABES) 2018 at ABES Ghaziabad 27-28 March 2018

 

2018-2019

 

  1. Tushar Jain,  Meenu and H K Sardana,” Design of Machine vision system for automated inspection in robotics”  International Conference of recent trends and Innovations in Mechanical Engineering(ICRTIME2018)  at Krishna Institute of Engineering and Technology ,Muradnagar, Ghaziabad pp.53,20-21 July 2018 (Not with me)

  2. Pradeep Jain and Meenu,”Object Recognition using Neural Networks”,International Conference     on Recent Trends and Innovations in Mechanical Engineering, KIET Group of Institutions, Ghaziabad, U.P,20th and21st  July 2018 (not with me)

  3. Pradeep Jain, Meenu and Namrata,” Machine Learning Techniques”, National Conference on Advanced concepts in mechanical engineering, AKGEC, Ghaziabad (U.P.), 7th and 8th September 2018

  4. Sonali Verma, Meenu Gupta “ Optimal design of spur gear using spider monkey optimization technique”, 2nd conference on Advances in Chemical and Enviornmental engineering held at B.R. Ambedkar National Institute of Technology on March 23-24 2019

  5. Sonali Verma, Meenu Gupta “ Optimization of spur gear using spider monkey optimization technique” 6th International conference on Production and Industrial  engineering held at B.R. Ambedkar National Institute of Technology on June 8-10  2019

  6. Deepak Kumar Chandel, Meenu,”Design Optimization of Spur gear with Particle Swarm optimization Technique”, 2nd conference on Advances in Chemical and Enviornmental engineering held at B.R. Ambedkar National Institute of Technology on March 23-24 2019

  7. Deepak Kumar Chandel, Meenu , “Design and optimization of spur gear for optimal weight with particle swarm optimization technique” 6th International conference on Production and Industrial  engineering held at B.R. Ambedkar National Institute of Technology on June 8-10  2019

 

BOOK CHAPTER

 

  1. Shubham, Meenu, &Mishra Joy Prakash,”Friction Stir Welding of Aerospace Materials: A state of Art review (DAAM International Scientific book 2016 pp 135-150 Chapter13

  2. Shubham Verma, Joy Prakash Misra and Meenu Gupta “Study of Temperature Distribution During FSW of Aviation Grade AA6082”    Manufacturing Engineering, Chapter 13 , Publisher Springer Singapore,Feb 2019 185-202

Ph.D Completed  and in progress                            

 

Sr. No.

Name of Research Scholar and Ph.D Regd. No.

Title of thesis

Status (submitted/ Awarded)

i.

Anuj Sehgal

1284/10

Modeling of machining parameters of S.G. Iron using Response Surface Methodology and ANN

Awarded

ii.

Dipesh popli

6120022

Dec 2012

Optimization of process parameters  of ultrasonic machining during machining of Nimonic alloy

Awarded

iii.

Surinder Kumar

2K09/Ph.D../NITK 1251-M

Cutting parameters optimization during turning of Glass fiber reinforced composites using Poly crystalline diamond and Carbide tool

Awarded

iv

Tushar Jain

1278/10

Development of Industrial Vision System for Two-Dimensional  Parts Recognition

Awarded

v

Pradeep Jain

Regn. No.-Ph.D./1282

Object Recognition using Artificial Neural Network

Submitted

vi

Pawan Kumar

6120038

08-03-2013

Par time

Analysis of machining characteristics of Wire-cut EDM  in nickel based Inconel

825

Awarded

vii

Shubham Verma

Regn. No. 6140005

27.1.2014

Experimental Investigation on friction stir welding of Aluminium alloys

Awarded

 

S. No.  

Details (Mention Year, Value etc. where relevant)

1.

Best technical paper award

A.K. Sehgal, Meenu “Optimization and Analysis of welding operation parameters for achieving the highest weld strength by using Taguchi Design of Experiment” in National Conference on Emerging Vistas of Mechanical Engineering in 21st century 2011

2.

Best technical paper award

 Simran, Meenu gupta “Optimization of composite leaf spring for weight using Particle Swam Optimization” in the National Conference on Technological development in Mechanical Engineering (TDME-2013) 2013

3.

Thomas Edison Award-2013

Meenu and Surinder Kumar, “Multi-objective optimization of cutting forces in turning of UD-GFRP Composite using Taguchi grey relational analysis”, Journal of Mechanical Engineering Photon   2013