Designation:    Associate Professor
Department:    Mechanical Engg
Qualification:    Ph.D. (CFD analysis of heat transfer enhancement of CHE, NIT Kurukshetra, 2010), M.Tech. (Solidification analysis of a sand casting using FEM, NIT Kurukshetra, 2004)
Address:    

CA-13, NIT kurukshetra

Publications:    

LIST OF PUBLICATIONS IN SCI/SCOPUS JOURNALS

1. Gulshan Sachdeva , R. Vasudevan and K S Kasana, May 2009, “Computation of Heat Transfer Enhancement in a Plate- Fin Heat exchanger with Triangular Inserts and Delta Wing Vortex Generator,” Vol. 63, issue 9, pp. 1031-1047, International Journal for Numerical Methods in Fluids, Wiley Publications. ISSN No. 1097-0363, doi: 10.1002/fld.2113
2. Gulshan Sachdeva , K S Kasana and R. Vasudevan, 2010, “Heat Transfer Enhancement by Using Rectangular Wing Vortex Generator on the Triangular Shaped Fins of Plate-Fin Heat Exchanger,” Vol. 39, issue 3, pp-151-165, Heat Transfer-Asian Research, Wiley Publications, ISSN No. 2688-4542
3. Vaibhav Jain, S.S.Kachhwaha and Gulshan Sachdeva, 5 August 2013, “Thermodynamic Performance Analysis of a Vapor Compression-Absorption Cascaded Refrigeration System,” Energy Conversion & Management, Vol. 75, pp-685-700. Elsevier Publication, ISSN No. 0196-8904, doi:10.1016/j.enconman.2013.08.024
4. Gulshan Sachdeva, Vaibhav Jain and S.S.Kachhwaha, Nov. 2013, “Exergy Analysis of a Vapor Compression – Vapor Absorption Cascade System,” International Journal of Air-conditioning and Refrigeration, Vol. 21, No.4, pp. 1350026(1-10).World Scientific Publication, DOI: 10.1142/S2010132513500260
5. Gulshan Sachdeva, Vaibhav Jain and S.S.Kachhwaha, Feb. 2014, “Energy Analysis of a Vapor Compression System Cascaded With Ammonia–Water Absorption System,” International Journal of Air-conditioning and Refrigeration, Vol. 22, No.1, pp. 1450007(1-12), World Scientific Publication. DOI: 10.1142/S2010132514500072
6. Vaibhav Jain, Surinder Singh Kachhwaha and Gulshan Sachdeva,  March 2014, “Exergy Analysis of Vapour Compression-Absorption Cascaded Refrigeration System using Modified Gouy-Stodola Equation,” International Journal of Exergy, Vol. 15, No. 1, pp-1-23, Inderscience Publication, ISSN No. 1742-8300, DOI:10.1504/IJEX.2014.065104
7. Praveen T. Hunashikatti, K. R. Suresh, B. Prathima & Gulshan Sachdeva, 25 November 2014, “Development of Desalination Unit using Solar Still Coupled with Evacuated Tubes for Domestic Use in Rural Areas” Current Science, Vol. 107, No. 10, pp-1683-1693, ISSN No. 0011-3891
8. J. Pastor, G. Sachdeva and Ram Bilash, 5 August 2014, “Exergy Analysis of a Vapor Absorption Heat Transformer using Modified Guoy-Stodala Equation” International Journal of Air-conditioning and Refrigeration, Vol. 22, No.3, pp. 1450019(1-10), World Scientific Publication. DOI: 10.1142/S2010132514500199
9. Vaibhav Jain, Gulshan Sachdeva and S. S. Kachhwaha, 30 December 2014, “NLP Model Based Thermoeconomic Optimization of Vapor Compression–Absorption Cascaded Refrigeration System” Energy Conversion & Management, Vol. 93, pp-49-62. Elsevier Publication, ISSN No. 0196-8904, doi:10.1016/j.enconman.2014.12.095
10. Vaibhav Jain, Gulshan Sachdeva and Surendra S. Kachhwaha, 4 November 2014, “Performance analysis of a Vapour Compression-Absorption Cascaded Refrigeration System with Undersized Evaporator and Condenser,  “Journal of Energy in Southern Africa, Vol. 25, pp. 23-36, ISSN No. 2413-3051,
11. T.Goel and G. Sachdeva, 23 January 2015, “Exergy Analysis of Various Absorption Heat Transformer Systems Using Classical and Modified Gouy–Stodola Equation,” International Journal of Air-conditioning and Refrigeration, Vol. 23, No.1, pp. 1550006(1-14). World Scientific Publication, DOI: 10.1142/S2010132515500066
12. Vaibhav Jain, Gulshan Sachdeva and S. S. Kachhwaha, 9 December 2014, “Thermodynamic Modelling and Parametric Study of a Low Temperature Vapour Compression-Absorption  System Based on Modified Gouy-Stodola Equation” Energy, Vol. 79, pp. 407-418, Elsevier Publication, ISSN No. 0360-5442, doi:10.1016/j.energy.2014.11.027
13. Vaibhav Jain, Gulshan Sachdeva and Surendra Singh Kachhwaha, 17 August 2015, “Energy, exergy, economic and environmental (4E) analyses based comparative performance study and optimization of vapor compression-absorption integrated refrigeration system” Energy, Vol. 91, pp. 816-832, Elsevier Publication. ISSN No. 0360-5442, doi:10.1016/j.energy.2015.08.041
14. Bhupender Sharma, Gian Bhushan and Gulshan Sachdeva, 2016, “Effect of flow structure on heat transfer in compact heat exchanger by using finite thickness winglet at acute angle” Journal of Thermal Engineering, Vol. 3, No. 2, pp 1149-1162, ISSN No. 2148-7847.
15. Vaibhav Jain, Gulshan Sachdeva and Surender Singh Kachhwaha, 2016, “Comparative performance study of vapour compression-absorption cascaded system at optimum condensing temperature,” International Journal Energy Technology and Policy, Vol. 12, No.2, pp. 122-135, Inderscience Publications.
16. Vaibhav Jain, Gulshan Sachdeva, Surender Singh Kachhwaha & Bhavesh Patel, 23 January 2016, “Thermo-economic and environmental analyses based multi-objective optimization of vapor compression–absorption cascaded refrigeration system using NSGA-II technique” Energy Conversion & Management, Vol. 113, pp -230-242. Elsevier Publication. ISSN No. 0196-8904, doi:10.1016/j.enconman.2016.01.056
17. Vaibhav Jain and Gulshan Sachdeva, 1 July 2017, “Energy, exergy, economic (3E) analyses and multi-objective optimization of vapor absorption heat transformer using NSGA-II technique” Energy Conversion & Management, Vol. 148, pp -1096-1113. Elsevier Publication. ISSN No. 0196-8904
18. Vikas Kumar and Gulshan Sachdeva, 12 September 2018, “1-D model for finding geometry of a single phase ejector” Energy”, Vol 165, pp- 75-92. Elsevier Publication
19. Vaibhav Jain, Gulshan Sachdeva & S. S. Kachhwaha 10 July, 2018, “Comparative performance study and advanced exergy analysis of novel vapor compression-absorption integrated refrigeration system” Energy Conversion & Management, Vol. 172, pp 81-97
20. Vaibhav Jain, Gulshan Sachdeva & Surender Singh Kachhwaha 25 January 2019, “Thermodynamic analysis of ejector-assisted vapour compression–absorption hybrid refrigeration system” International Journal of Ambient Energy, Vol. 172, pp 81-97
21. Vaibhav Jain, Neelam Sharma, Gulshan Sachdeva & SS Kachhwaha 29 August 2019, “Performance analysis and multi-objective optimization of cooling tower assisted vapor compression-absorption cascaded and hybrid refrigeration systems” International Journal of Green Energy, Pages 1-22, DOI: 10.1080/15435075.2019.1653874
22. Vikas Kumar and Gulshan Sachdeva, 2019, “Experimental Investigation on Ejector Assisted Vapor Compression System” International Journal of Air-conditioning and Refrigeration, World Scientific Publication, DOI: DOI: 10.1142/S2010132519500299
23. Vaibhav Jain, Ashu Singhal, Gulshan Sachdeva and SS Kachhwaha 14 August 2020, “Advanced exergy analysis and risk estimation of novel NH3-H2O and H2O-LiBr integrated vapor absorption refrigeration system” Energy Conversion & Management, Vol. 224
24. Vaibhav Jain, Rajiv Rawat, Gulshan Sachdeva and Vikas Kumar 2020, “Multi-objective optimization of cascade refrigeration system using the concept of modified and advanced exergy, risk level and thermal inventory” International Journal of Air-conditioning and Refrigeration, World Scientific Publication, DOI: 10.1142/S2010132520500364, Vol. 28, No. 4 (2020) 2050036 (23 pages)
25. Dishant Sharma, Gulshan Sachdeva and Dinesh Kumar Saini 2020, “Optimized refrigerant flow rate and dimensions of the ejector employed in a modified ejector vapor compression system” International Journal of Air-conditioning and Refrigeration, World Scientific Publication, DOI: 10.1142/S2010132520500388, Vol. 28, No. 4 (2020) 2050038
26. Vikas Kumar, Gulshan Sachdeva, Sandeep Tiwari, Parinam Anuradha and Vaibhav jain 2021, “An Experimental Investigation on Vapor Compression Refrigeration System Cascaded with Ejector Refrigeration System”, International Journal of Air-conditioning and Refrigeration, World Scientific Publication, DOI: 10.1142/S2010132521500280, Vol. 29, No. 3 (2021) 2150028
27. Gulshan Sachdeva and Bharat Sharma 2021, “Exergy Analysis of an Ejector Cooling System by Modified Gouy–Stodola Equation, International Journal of Air-conditioning and Refrigeration, World Scientific Publication, DOI: 10.1142/S2010132521500279, Vol. 29, No. 3 (2021) 2150027
28. Abhishek Dhiman, Gulshan Sachdeva, September 2022 Experimental investigation of an indirect-type solar cooker for indoor cooking based on parabolic dish collector. Heat Transfer. 2023; 52: 378-394. doi:10.1002/htj.22699
29. Abhishek Dhiman, and Gulshan Sachdeva. December 2022 “Energy and Exergy Analysis of a Pressurized Solar Cooking System Based on a Parabolic Dish Collector.” EVERGREEN Joint Journal of Novel Carbon Resource Sciences & Green Asia Strategy, Vol. 09, Issue 04, pp 1168-1180
30. Surender Antil, Gulshan Sachdeva, Avdhesh Sharma. January 2023. Advancements and challenges in the fluidized bed gasification system: A comprehensive review. Journal of Thermal Engineering, 9 (1), 233-246. DOI: 10.18186/thermal.1245279
31. Gulshan Sachdeva, Bharat Sharma, Parinam Anuradha, Sameer Verma March 2023, “Irreversibility Analysis of an Ejector Refrigeration Cycle by Modified Gouy-Stodola Formulation” EVERGREEN Joint Journal of Novel Carbon Resource Sciences & Green Asia Strategy, Vol. 10, Issue 01, pp 252-271
32. Sharma B, Sachdeva G. March 2023 Energy and Exergy (2E) Analysis of a Jet Pump-Assisted Ejector Cooling System. Iran J Sci Technol Trans Mech Eng. https://doi.org/10.1007/s40997-023-00644-y
33. Balamurugan Adhithan and Gulshan Sachdeva, March 2023 “Analysing the emissions and fuel efficiency of fish-waste biodiesel in a compression ignition engine” International Journal of Ambient Energy, https://doi.org/10.1080/01430750.2023.2190329, VOL. 44, NO. 1, pp 1829–1839,
34. Avdhesh Kr. Sharma, Surender Antil, Gulshan Sachdeva, May 2023 “Small-Scale Toroidal Fluidized Bed Gasification System: Development and Experimental Aspects” Journal of Energy Resources Technology, Vol. 145, pp 051501-1 to -051501-9,
35. Gulshan Sachdeva, Ajay Jaiswar, Parinam Anuradha, Vaibhav Jain August 2023 “Comparative performance investigation of a dual evaporator cycle using an ejector with the conventional cycle using a pressure reducing valve”. Int. J. Air-Cond. Ref. 31, 20   https://doi.org/10.1007/s44189-023-00036-6
36. Sharma Bharat, Sachdeva Gulshan. September 2023 “Performance and Dimensions Determination of an Ejector Utilized in Ejector Cooling Cycle with Eco-Friendly Working Fluids.” EVERGREEN Joint Journal of Novel Carbon Resource Sciences & Green Asia Strategy, Vol. 10, Issue 03, pp 1460-1478,
37. Vaibhav Jain, Sonal Khurana, Anuradha Parinam, Gulshan Sachdeva, Akshat Goel and Kanchan Mudgil December 2023, “Experimental analysis of an ejector assisted dual-evaporator vapor compression system” Energy Conversion & Management, Vol. 224, 117966
38. Gulshan Sachdeva, Parinam Anuradha, Vaibhav Jain and Y. T. Venkata Teja March 2024 “Performance analysis of a novel ejector-assisted condenser outlet split dual-evaporator refrigeration system”. Int. J. Air-Cond. Ref.  32:7 https://doi.org/10.1007/s44189-024-00051-1
39. Vaibhav Jain Gulshan Sachdeva March 2024 “Performance Evaluation of Two-Stage Vapor Compression Refrigeration System using R134a as Refrigerant”, ASHRAE,
40. Balamurugan Adhithan and Gulshan Sachdeva, March 2025 “Optimization and evaluation of Fe and Zn-coated zeolite catalysts for biodiesel engine emission reduction and performance enhancement” Biomass and Bioenergy 197, 107808

 

LIST OF PUBLICATIONS IN REFERRED JOURNALS

1. Sachdeva G, Kasana K S & Vasudevan R, 2009, “Numerical Analysis of a Plate- Fin Cross Flow Heat Exchanger Having Plane Triangular Secondary Fins and Inline Arrangement of Rectangular Wing Vortex Generator,” International Journal of Applied Engineering Research, Vol.4, No.9, pp-1705-1713. (Scopus 2010-2017)
2. Sachdeva G, Kasana K S & Vasudevan R, 2010, “Analysis on Heat Transfer Enhancement by Using Triangular Shaped Inserts as  Secondary Fins in Cross Flow Plate Fin Heat Exchanger,”  International Journal of Dynamics of Fluids, Vol. 6, No 4, pp-41-47.
3. Gulshan Sachdeva, Vaibhav Jain & S.S.Kachhwaha, 2014, “Performance Study of Cascade Refrigeration System Using Alternative Refrigerants,” International Journal of Mechanical, Industrial Science and Engineering, Vol. 8, No.3, pp. 1-7.
4. Gulshan Sachdeva & Ram Bilas, January 2015, “Thermodynamic Analysis of a Vapor Absorption System Using Modified Gouy-Stodola Equation,” International Journal of Electrical, Computer and Electronics & Communication Engineering, Vol. 8, No.12, pp. 1837-1842.
5.  Bhupender Sharma, Gulshan Sachdeva & Gian Bhushan 2016, “Performance evaluation of vortex generator of finite thickness to augment heat transfer in a compact heat exchanger” Journal of Mechanical Engineering and Technology, Vol. 8, No. 1, pp. 1-16, IISN No. 2180-1053.
6. Gulshan Sachdeva, Vaibhav Jain, 2016, “Comparative Exergy Analysis of Vapor Compresssion Refrigeration System Using Alternative Refrigerants,” International Journal of Mechanical, aerospace, industrial, mechatronic, and Manufacturing Engineering, Vol. 10, No.6, pp. 989-996.

 

LIST OF PUBLICATIONS IN INTERNATIONAL, NATIONAL CONFERENCES

 

1. Gurjeet Singh and Gulshan Sachdeva, “CFD Simulation of Round and Flat Tube Fin Heat Exchanger for Laminar and Turbulent Flow Models”, Proceedings 37th National & 4th International Conference on Fluid Mechanics and Fluid Power, ISBN: 978-81-910571-1-9, Paper Code-HT-20, I.I.T. Madras, Dec 14-16, 2010.
2. Gulshan Sachdeva, K. S. Kasana K S and R. Vasudevan, “Heat Transfer Enhancement and Flow Losses in a Plate-Triangular Fin Heat Exchanger with Longitudinal Vortex Generators: A Comparison of Rectangular and Delta Wing”, Proceedings 37th National & 4th International Conference on Fluid Mechanics and Fluid Power, ISBN: 978-81-910571-1-9, Paper Code-HT-18, I.I.T. Madras, Dec 14-16, 2010
3. Vaibhav Jain, Gulshan Sachdeva and Surender S Kachhwaha, “Performance analysis of hybrid refrigeration system under fouled conditions” Proceedings of the 22th National and 11th International ISHMT-ASME Heat and Mass Transfer Conference, December 28-30, 2013, IIT Kharagpur, India
4. Vaibhav Jain, Gulshan Sachdeva and Surender S Kachhwaha, “Comparative Performance Study of Vapour Compression-Absorption Cascaded System at Optimum Condensing Temperature” Proceedings of IVth International Conference on Advances in Energy Research, December 10-12, 2013, IIT, Bombay, India.
5. Vaibhav Jain, Gulshan Sachdeva & Surendra S Kachhwaha “Performance improvement of vapor compression absorption refrigeration system using ejector”, Proceedings of 23rd National Heat and Mass Transfer Conference and 1st International ISHMT-ASTFE Heat and Mass Transfer Conference, IHMTC 2015 Page No 1-8, Paper Code 119, Thiruvananthapuram, India, 17-20 December 2015
6. Navneet, Gulshan Sachdeva, Mahesh Kumar and Pankaj Khatak “Design and performance analysis of absorption heat transformer using first law of thermodynamics”, Proceedings of 23rd National Heat and Mass Transfer Conference and 1st International ISHMT-ASTFE Heat and Mass Transfer Conference, IHMTC 2015 Page No 1-8, Paper Code 234, Thiruvananthapuram, India, 17-20 December 2015
7. Vaibhav Jain, Gulshan Sachdeva & Surendra S Kachhwaha, “Estimation of Optimum Heat Exchanger Area of Vapor Compression-Absorption Integrated System Using Modified Irreversibility Approach” Proceedings of 5th International Conference on Energy Research, Department of Energy Science and Engineering, Indian Institute of Technology, Mumbai 15th to 17th December 2015, pp 79-88.
8. Gulshan Sachdeva, K S Kasana and R Vasudevan, “Effect of Varying the Aspect Ratio of Rectangular Wing Mounted on the Triangular Shaped Fins of Plate-Fin Heat Exchanger,” Proceeding International Conference on Advances in Mechanical Engineering, Paper Code- TF-17, pp-80-84, S.V. National Institute of Technology, Surat- Gujrat, January 4-6, 2010.
9. Gulshan Sachdeva, K S Kasana and R Vasudevan, “Numerical Analysis of Plate-Fin Heat Exchanger Having In-Line Delta Wing Vortex Generator on the slant surfaces of the Triangular Shaped Inserts,” Proceeding International Conference on Advances in Mechanical Engineering, Paper Code- TF-09, pp-41-45, S.V. National Institute of Technology, Surat- Gujrat, January 4-6, 2010.
10. Jaydeep Pastor, Gulshan Sachdeva and Ram Bilash, “Exergy Analysis of an Absorption Heat Transformer and Study of the Effects of Variation in Different Parameters”, Proceedings International Mechanical Engineering Congress, Page No 444-448, NIT Tiruchirappalli, Tamil Nadu, India, June 13-15, 2014.
11. Ram Bilash, Gulshan Sachdeva, and Jaydeep Pastor “Exergy Analysis of Vapour Absorption Refrigeration System Using Modified Guoy-Stodola Equation”, Proceedings International Mechanical Engineering Congress, Page No 224-227, NIT Tiruchirappalli, Tamil Nadu, India, June 13-15, 2014.
12. Tarun Goel, Vishal Sharma and Gulshan Sachdeva, “Thermodynamic Analysis of Different Absorption Heat Transformer System Used for Producing Hot Fluid”, Proceedings International Mechanical Engineering Congress, Page No 419-422, NIT Tiruchirappalli, Tamil Nadu, India, June 13-15, 2014.
13. Vishal sharma, Tarun Goel and Gulshan Sachdeva, “Elementary Design of a Waste Heat Integrated Absorption Heat Transformer System”, Proceedings International Mechanical Engineering Congress, Page No 427-430, NIT Tiruchirappalli, Tamil Nadu, India, June 13-15, 2014.
14. G. Sachdeva & J. Kataria, “Performance and Emission Studies of a Variable Compression Ratio C.I. Engine using Bio-Diesel made from Waste Cooking Oil,” Proceedings International Conference on Alternative Fuels for I. C. Engines, pp 81-85, NIT Jaipur. 6-8 February 2013
15. Gaurav Aggarwal, Gulshan Sachdeva and M.L. Aggarwal “Predicting Taper of Parabolic Leaf Springs in Automotive Vehicles,” Proceedings International Conference on Frontier in Mechanical Engineerimng , Paper Code- DA-201, pp-111-117, NIT Surathkal,  May 20-22, 2010
16. Gulshan Sachdeva and Gaurav Aggarwal, “Controlling the Quenching Oil Temperature in Leaf Springs Industry,” Proceedings International Conference on Frontier in Mechanical Engineering, Paper Code- MMF-109, pp- 28-33,  NIT Surathkal, May 20-22, 2010.
17. A Baruah, D K Saini and G Sachdeva, 2019, “Exergy investigation of a vapor compression system comprising ejector for isentropic expansion”  2nd International Conference on New Frontiers in Engineering, Science & Technology (NFEST) 18–22 February 2019, Kurukshetra, Haryana, India, Journal of Physics: Conference Series, IOP Publication, Volume 1240, DOI: 10.1088/1742-6596/1240/1/012125
18. Vikas Kumar and Gulshan Sachdeva, 2019, “Experimental investigation of an ejector refrigeration system using R-134a” 2nd International Conference on New Frontiers in Engineering, Science & Technology (NFEST) 18–22 February 2019, Kurukshetra, Haryana, India, Journal of Physics: Conference Series, IOP Publication, Volume 1240, DOI: 10.1088/1742-6596/1240/1/012168
19. D K Saini, A Baruah and G Sachdeva, 2019 “Vapour compression system analysis undergoing expansion in an ejector” 2nd International Conference on New Frontiers in Engineering, Science & Technology (NFEST) 18–22 February 2019, Kurukshetra, Haryana, India, Journal of Physics: Conference Series, IOP Publication, Volume 1240, DOI: 10.1088/1742-6596/1240/1/012131
20. B Sharma, S Shubham and G Sachdeva, 2019 “Performance prediction of ejector refrigeration system using R1234yf as working fluid” 2nd International Conference on New Frontiers in Engineering, Science & Technology (NFEST) 18–22 February 2019, Kurukshetra, Haryana, India, Journal of Physics: Conference Series, IOP Publication, Volume 1240, DOI: 10.1088/1742-6596/1240/1/012128
21. Swati Mor, Niraj Kumar, B S Sikarwar and Gulshan Sachdeva, 2021 “Thermo-hydraulic analysis of a solar cogeneration air-heater” International symposium on Fluids and Thermal Engineering (FLUTE 2021), 22 July 2021, Amity school of engineering and technology, Haryana, Journal of Physics: Conference Series, IOP Publication, Volume 2178, DOI: 10.1088/1742-6596/2178/1/012026
22. G. Sachdeva, Bhupender Sharma, Gian Bhushan, “Numerical Study Considering the Location Effects of Wing Type Vortex Generator on Heat Transfer Enhancement” Proceedings VII. International University Conference on Thermal Engineering, Print ISSN 2010-376X, World Academy of Science, Engineering and Technology, Year 7, Issue 79, July 27-29, 2011 Paris, France.
23. Gulshan Sachdeva, Vaibhav Jain and S S Kachhwaha, “Performance study of cascade refrigeration system using alternative refrigerants” Proceedings International conference on Mechanical and Production Engineering, Print ISSN 2010-376X, World Academy of Science, Engineering and Technology, Year 7, Issue 79, pp. 22-28 March 10-11, 2014 Miami, USA.
24. Gulshan Sachdeva, and Ram Bilash, “Thermodynamic analysis of a vapor absorption system using modified Guoy-Stodola equation” Proceedings International conference on energy Systems engineering and Technology, Print ISSN 2010-376X, World Academy of Science, Engineering and Technology, Year 7, Issue 79, pp 747-752, Dec 15-16, 2014, Sydney Australia
25. Gulshan Sachdeva, and Vaibhav Jain “Comparative exergy analysis of vapor compression refrigeration system using alternative refrigerants” Proceedings 18th International conference on Energy Systems Engineering and Technology, Print ISSN 2010-376X, World Academy of Science, Engineering and Technology, Year 7, Issue 79, pp 1275-1282, June 13-14, 2016, Venice Italy
26. Karun Belwal, Gulshan Sachdeva, Bharat Sharma “Performance Evaluation of a dual evaporator ejector refrigeration system using Gouy-Stodola Equation”, 1st International Conference on Mechanical Engineering: Researches and Evolutionary Challenges, NIT Warangal June 23-25, 2023
27. Sameer Kumar Verma, Satyajeet Kumar, Gulshan Sachdeva “A review on exergy analysis of ejector refrigeration system”, International Conference on Optimization Techniques and Recent Innovations in Mechanical Engineering (ICOTRIME 2020), Ghaziabad, India, 11-12 December 2020, Published in IOP Conf. Series: Materials Science and Engineering, Volume 1104, doi:10.1088/1757-899X/1104/1/012026, Online ISSN: 1757-899X
28. Bharat Sharma, Gulshan Sachdeva, Vikas Kumar “Exergy analysis of heat assisted ejector refrigeration system using R1234yf”, International Conference on Optimization Techniques and Recent Innovations in Mechanical Engineering (ICOTRIME 2020), Ghaziabad, India, 11-12 December 2020, Published in IOP Conf. Series: Materials Science and Engineering, Volume 1104, doi:10.1088/1757-899X/1104/1/012035, Online ISSN: 1757-899X
29. Vikas Kumar, Sandeep Tiwari, Gulshan Sachdeva, Vaibhav Jain, Vishal Mittal, Paras Sharma, Vipin Rajput, & Homenidhi Bhardwaj “Performance analysis of ERS using R134a – An experimental investigation (Part 1) – Ejector design and performance analysis”, International Conference on Optimization Techniques and Recent Innovations in Mechanical Engineering (ICOTRIME 2020), Ghaziabad, India, 11-12 December 2020, Published in IOP Conf. Series: Materials Science and Engineering, Volume 1104, doi:10.1088/1757-899X/1104/1/012032, Online ISSN: 1757-899X
30. Vikas Kumar, Sandeep Tiwari, Gulshan Sachdeva, Vaibhav Jain, Devanshu, Paras Raghav, Ankush Nagar & Uttam “Performance analysis of ERS using R134a – An experimental investigation (Part 2) – System design”, International Conference on Optimization Techniques and Recent Innovations in Mechanical Engineering (ICOTRIME 2020), Ghaziabad, India, 11-12 December 2020, Published in IOP Conf. Series: Materials Science and Engineering, Volume 1104, doi:10.1088/1757-899X/1104/1/012033, Online ISSN: 1757-899X
31. Vikas Kumar, Sandeep Tiwari, Gulshan Sachdeva, Vaibhav Jain“ Performance analysis of ERS using R134a – An experimental investigation (Part 3) – Experimental results”, International Conference on Optimization Techniques and Recent Innovations in Mechanical Engineering (ICOTRIME 2020), Ghaziabad, India, 11-12 December 2020, Published in IOP Conf. Series: Materials Science and Engineering, Volume 1104, doi:10.1088/1757-899X/1104/1/012035, Online ISSN: 1757-899X
32. Rohit Jain, Gulshan Sachdeva “One Dimensional Study of Ejector Refrigeration System by considering the Fanno Flow in the Mixing Chamber”, Proceedings of International Conference on Sustainable Development Through Research in Engineering and Management, SDREM 2016, Paper code 434, YMCA University of Science & Technology, Faridabad, India, 26-27 December 2016
33. Ankit Panghal, Gulshan Sachdeva “1-D Analysis of Ejector with the Effect of Condenser Temperature on the COP and Performance Parameters of Ejector Refrigeration System”, Proceedings of International Conference on Sustainable Development Through Research in Engineering and Management, SDREM 2016, Paper code 414, YMCA University of Science & Technology, Faridabad, India, 26-27 December 2016
34. Varun Saini, Gulshan Sachdeva “Design of Multiejector refrigeration system for Constant Entrainment Ratio and its Effect on COP of System”, Proceedings of National Conference on trends and Advancement in Mechanical Engineering, TAME 2017, YMCA University of Science & Technology, Faridabad, India, 16-17 March 2017
35. Gourav Barwal, Gulshan Sachdeva “Comparison of Common Ejector Refrigeration System and Ejector Refrigeration System with Jet Pump”, Proceedings of National Conference on trends and Advancement in Mechanical Engineering, TAME 2017, YMCA University of Science & Technology, Faridabad, India, 16-17 March 2017
36. S. Rani, G. Sachdeva, V. Jain & S. S. Kachhwaha “Performance analysis of multi evaporator vapor compression system using ejector as an Expansion device”, (NCRAC-2015) Proceedings of 4th National Conference on Refrigeration and Air Conditioning (NCRAC-2015 ) Rajalakshmi Engineering College, Chennai,  India, 28th to 30th October 2015.
37. Sonia Rani & Gulshan Sachdeva, “Theoretical performance analysis of vapor jet ejector for R134a”, Proceedings of National conference on Paradigm shift in management and Technology (PSIMT-2015), Page No, YMCA Faridabad, Haryana, India, April 2015
38. Gulshan Sachdeva and Sandeep Singh, “Fin Density Effects on the Performance of Heat Transfer and Fluid Flow Characteristics of Triangular Corrugated Wavy Channel”, Proceedings 1st All India Seminar on Emerging Technologies in Mechanical Engineering, The Institution of Engineers (India), Alwar Local Center, pp- 17-24, Dec 04-05,2010.
39. Sandeep Singh and Gulshan Sachdeva “Study of Performance of Triangular Corrugations Wavy Channel for Heat Transfer Effectiveness and Fluid Flow Characteristics Compared with Sinusoidal Wavy Channel”, Proceedings International Conference on Mathematics and Soft Computing (Applications in Engineering) N.C College of Engineering, Israna, Panipat in collaboration with Indian Society of Information Theory & Applications (India),  pp- 413-416, Dec 04-05,2010.
40. G. Sachdeva, Gaurav Aggarwal, M.L.Aggarwal “Experimental Prediction of Stiffness of Parabolic Leaf Springs in Automotive Vehicles,” Proceedings National Conference on Advanced Manufacturing Techniques, Paper Code- OP-201, pp-81-83, S.M.V.D. University, Katra, J&K. November 5-6, 2009
41. G. Sachdeva & Parinam Anuradha “FEM Based Solidification Analysis by Fictitious Heat Flow Method,” Proceedings National Conference on Advances in CAD-CAM Technology, NITTTR
42. Saket Shubham and Gulshan Sachdeva “Advanced exergy analysis of a heat driven ejector based refrigeration system”, Proceedings of National Conference on Advances in Chemical and Environmental Engineering, ACEE-19, Paper ID: CH-218, NIT Jalandhar, India, 23-24 March 2019
43. Bharat Sharma and Gulshan Sachdeva “Conventional Exergy analysis of an ejector refrigeration system”, Proceedings of National Conference on Advances in Chemical and Environmental Engineering, ACEE-19, Paper ID: CH-249, NIT Jalandhar, India, 23-24 March 2019
44. Varun Singla and Gulshan Sachdeva “A Review on two-phase flow ejector when used as expansion device in vapor compression”, Proceedings of National Conference on Advances in Chemical and Environmental Engineering, ACEE-19, Paper ID: CH-274, NIT Jalandhar, India, 23-24 March 2019
45. Arunjoy Baruah, Dinesh Kumar Saini and Gulshan Sachdeva “2^nd law analysis of an ejector expansion refrigeration system with R134a as refrigerant”, Proceedings of National Conference on Advances in Chemical and Environmental Engineering, ACEE-19, Paper ID: CH-228, NIT Jalandhar, India, 23-24 March 2019
46. Dinesh Kumar Saini, Arunjoy Baruah and Gulshan Sachdeva “Performance evaluation of vapour compression system with an ejector as an expansion device”, Proceedings of National Conference on Advances in Chemical and Environmental Engineering, ACEE-19, Paper ID: CH-229, NIT Jalandhar, India, 23-24 March 2019
47. Vikas Kumar, Gulshan Sachdeva “An Experimental Investigation of Ejector Enhanced Vapor Compression Refrigeration System using R-134a”, Proceedings of National Conference on Recent Advances in Mechanical Engineering, NCRAME 2017 Page No 74-76, Paper Code 17, NIT Kurukshetra, India, 02-03 June 2017, ISBN No. 978-93-86256-89-8
48. Ankit Panghal, Gulshan Sachdeva “Analysis of Ejector Refrigeration System of Fixed Ejector Geometry”, Proceedings of National Conference on Recent Advances in Mechanical Engineering, NCRAME 2017 Page No 108-112, Paper Code 24, NIT Kurukshetra, India, 02-03 June 2017, ISBN No. 978-93-86256-89-8
49. Rohit Jain, Gulshan Sachdeva “Analysis of Ejector Refrigeration System Considering Friction in the Mixing Chamber”, Proceedings of National Conference on Recent Advances in Mechanical Engineering, NCRAME 2017 Page No 113-117, Paper Code 25, NIT Kurukshetra, India, 02-03 June 2017, ISBN No. 978-93-86256-89-8
50. Bhupender Sharma, Gulshan Sachdeva & Gian Bhushan “Enhancement of Thermal-hydraulic Performance of Plate-Fin Heat Exchanger using Finite Thickness Wing Type Vortex Generator”, Proceedings of National Conference on Recent Advances in Mechanical Engineering, NCRAME 2017 Page No 236-241, Paper Code 50, NIT Kurukshetra, India, 02-03 June 2017, ISBN No. 978-93-86256-89-8
51. Varun Saini, Gulshan Sachdeva “A Review on the Modification to Simple Ejector Refrigeration System”, Proceedings of IVth International Conference on Production & Industrial Engineering, CPIE 2016, Page Code CPIE-2016_352, B.R. Ambedkar National Institute of Technology, Jalandhar, India, 19-21 December 2016
52. Gourav Barwal, Gulshan Sachdeva “Effect on the ejector performance due to heat transfer in mixing chamber”, Proceedings of IVth International Conference on Production & Industrial Engineering, CPIE 2016, Page Code CPIE-2016_352, B.R. Ambedkar National Institute of Technology, Jalandhar, India, 19-21 December 2016
53. Sonia Rani & Gulshan Sachdeva, “A comparative analysis of three ozone friendly refrigerants with R22 for vapor compression refrigeration system”, Proceedings of National conference on Mathematical Analysis and Computation, Page No, MNIT Jaipur, Rajasthan, India, February 2015
54. Hari Prakash, Gulshan Sachdeva & Sandeep Singh, “Analysis of ejector refrigeration system with environment friendly working fluids other than CFC’s ”, Proceedings of 3rd National conference on Nanoscience and Instrument Technology (NCNIT-2015), Page No 60, NIT Kurukshetra, Haryana, India, May 2015
55. Hari Prakash, Gulshan Sachdeva & Sandeep Singh, “The behavior of a combined vapor compression and ejector refrigeration system using R134a and R141b as working fluids”, Proceedings of 3rd National conference on Nanoscience and Instrument Technology (NCNIT-2015), Page No 61, NIT Kurukshetra, Haryana, India, May 2015
56. P. T. Hunashikatti & Gulshan Sachdeva. An Experimental Study of Water Purification System using Solar Energy. Proceedings National Conference on Environment: Pollution & Protection, Jan.30-Feb.1 2014, NIT Durgapur.
57. Taliv Hussain, Rakesh Kumar, Ravi Kant Shandlay, Gulshan Sachdeva, “Experimental Investigation of Thermal Performance of Water flat Plate Collector at Different Mass Flow Rates and Angle of Inclination,” Proceedings National Conference on Low and High Temperature Applications of Solar Energy, pp 32-36, NIT Kurukshetra, 25-26 May 2013.

 

 

Email:    gulshansachdeva@nitkkr.ac.in
Phone No:    +919812533221